Description
Janus HTC2050 – Year 2010
CNC Lathe
| Turning length | 500 mm |
| Turning Ø | 200 mm |
| Ø above the bed | 500 mm |
| Type of CNC | FANUC Series 0i Mate-TC |
| X-axis | 600 mm |
| Z-axis | 160 mm |
| Janus HTC2050 | CNC Lathe |
| Spindle bore | 55 mm |
| Turning speed | 4000 rpm |
| Spindle motor power | 11 kW |
| Tailstock | yes |
| Bar feeder | no |
| Year : 2010 | |
| Length x width x height | 3900.0 × 1800.0 × 1750.0 |
| Weight | 5000 kg |
Technical data of the JANUS HTC2050 CNC lathe
– maximum turning length: 500 mm
– maximum turning diameter: 200 mm
– turning diameter over the bed: 500 mm
– accelerated feeds in the X / Z axis: 16/20 m / min
– maximum longitudinal travel of the sled: 600 mm
– maximum transverse travel of the support: 160 mm
– handle diameter: 210 mm
– stepless spindle speed adjustment
– maximum spindle speed: 4000 rpm
– minimum spindle speed: 40 rpm
– spindle bore diameter: 55 mm
– tool shank size: 25×25 mm
– tailstock sleeve cone: Morse 5
– maximum extension of the tailstock sleeve: 100 mm
– tailstock sleeve diameter: 80 mm
– bed inclination angle: 45°
– main engine power: 11 kW
– torque of servo motors in the X, Z axis: 7 Nm
– hydraulic unit motor power: 1.5 kW
– chip conveyor engine power: 0.2 kW
– engine power of the coolant pump: 0.55 kW
– installed power: 30 kVA
– control voltage: 24 V
– lighting voltage: 230 V
– power supply: 3x 400V; 50 Hz
– dimensions (length x width x height): 3900 x 1800 x 1750 mm
– machine weight: 5000 kg
Equipment of the JANUS HTC 2050 lathe
– CNC controller: FANUC Series 0i Mate-TC
– chip conveyor
– tools
The CNC lathe JANUS HTC2050, manufactured in 2010 in Poland, thanks to its simple construction, high stability and reliability of use, will face any challenge. Using the necessary equipment for high-speed and finishing machining, it is possible to perform precise machining of internal holes, columns, cones, arcs and all types of screw threads on the machine.
The JANUS lathe has a chuck with a diameter of 210 mm and a 45° inclined bed to facilitate chip removal and increase the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings can accommodate radial and axial loads simultaneously, ensuring low spindle temperature rise and less thermal distortion during high-speed finishing. The spindle drive allows you to steplessly change the rotational speed in the range of 40 to 4000 rpm. The numerical lathe is offered with a chip conveyor, FANUC Series 0i Mate-TC CNC control and tools shown in the photos. The total weight of the machine is 5000 kg.
