Description
INGERSOLL MASTER CENTER – Year 2013
CNC HORIZONTAL TABLE TYPE BORING MILL
| Type of CNC Control | Fanuc 31I-B5 CNC Control |
| Table Size | 5,250 mm x 3,000 mm |
| Table Load Capacity | 50 Ton |
| X-Axis (Table Linear Travel, Across) | 5,500 mm (216.54″) |
| Y-Axis (Headstock Vertical Travel ) | 3,800 mm (149.60″) |
| Z-Axis (RAM Horizontal Travel, In/Out) | 1,100 mm (43.30″) |
| C-Axis (Rotary Axis around Horizontal Spindle) | Continuous & Reversible |
| E-Axis (Table Rotation) | 360° |
| W-Axis (Column Horizontal Travel, In/Out) | 3,800 mm (149.60″) |
| B-Axis (Nutating Axis) | ± 95° |
| Spindle Horsepower | 125 HP continuous |
| Ram Area (L-R x F-B) | 600 mm x 600 mm / 23.6″ x 23.6″ |
| Axis Speeds / Feed Rates (X, Y, & W Axis) | 15,000 mm/min 600 IPM |
| Axis Speeds / Feed Rates (Z-Axis) | 5,000 mm/min 196.8 IPM |
| Axis Speeds / Feed Rates (C-Axis) | 8 RPM |
| Axis Speeds / Feed Rates (E-Axis) | 1.25 RPM |
INGERSOLL MASTER CENTER CNC HORIZONTAL
TABLE TYPE BORING MILL
Model MASTER CENTER, New 2013
Work Completed During Retrofit/ Rebuild:
Fanuc 31i Retrofit 2013, New Ballscrews, New Motors, New Drives, New Wiring, Ram Rebuilt,
Heads Rebuilt, Waycovers Rebuilt, Bedways Ground, All New Piping for Lube and Pneumatic,
New Chip Conveyors, C-Axis Bearing, C-Axis Clamping, Chiller Unit.
This Very Large Rebuilt Ingersoll Master Center is a Horizontal Boring Mill with a Massive 24″sq
Ram Instead of a Quill.
It has a 206″ x 120″ CNC 360° Rotary Table with 215″ of Cross Travel.
The Massive Column has 150″ of Vert Travel and 150″ of W-Axis Column Travel. The Machine has
no Toolchanger but
has a Qty
(7) Head Automatic Head Changer with These Heads:
(2) Nutating Heads,
(1) 6:1 Straight,
(1) 6:1 Angle,
(1) 1:1 Straight,
(1) 1:1 Angle,
(1) 12:1 Angle (Right)
for Large Slotters and Face Milling. A Master Drive System with Integrated C-Axis is
Powering the Spindle Units.
The Head Changer Arrangement Allows this Horizontal Boring Mill
to be Used for a Flexible Application Range.
This Flexibility Includes Capacity for 5-sided Machining,
Vertical Turning and Machining on Inclined and Angular Surfaces.
Equipped with a Modern Hydrostatic
Guide Way System for X,Y,Z,W and E-Axis Which Has Virtually No Friction,
Practically No Wear,
and Extremely Good Dampening Characteristics.
Further Equipped with Modern AC-axis Drives,
and a Backlash Free Drive Systems, and Digital Feedback.
EQUIPPED WITH:
Fanuc 31i CNC Control,
206″ x 120″ CNC Rotary Table with Heidenhein Rotary Scale Feedback
and qty
(4) Shot Pin Table Locking System,
(7) Head Automatic Head Changer, Ram Type Spindle,
Flood Coolant and Through the Tool Coolant, and
Upgraded Chip Conveyors.
Note: Currently No Pit Except for the Chip Conveyor.
