Description
Ocean Clipper II CNC Angle Line – Year 2021
| Year | 2021 |
|---|---|
| Make | Peddinghaus |
| Model | Ocean Clipper |
| Ocean Clipper | CNC Angle Line |
| Punch Capacity | 75 Ton |
|---|---|
| Shear Capacity | 100 Ton |
| Drill Speed (Min/Max) | 200 RPM / 850 RPM |
| Drill Power | 13.5 HP |
| Angles | 1 1/2′ x 1 1/2″ x 1/8″ – 6″ x 6″ x 5/8″ |
Manufacturer Catalogue Information about Ocean Clipper II :
Ocean Clipper II CNC Angle Line Technical Specifications
| Angle Sizes | |
| Max. Angle Size | 6 x 6 x 5/8″ (150 x 150 x 15mm) |
| Min. Angle Size | 1-1/2 x 1-1/2 x 1/8″ (40 x 40 x 4mm) |
| Flat Bar Sizes | |
| Max. Flat Bar Size | 6 x 5/8″ (150 x 15mm) |
| Min Flat Bar Size | 2 x 1/4″ (50 x 6mm) |
| Punch – Slots, Holes, Shapes etc. | |
| Punching Tonnage | 75 Tons US (68 Metric Tons) |
| Max. Punch Size | 1-1/4″ Diameter – Standard (270)
26mm Diameter – Metric (PFP #3) |
| Punch Cycle Time | 2 seconds |
| Min. Gauges (Using 272 punches, 271 dies) | 11/16″ plus leg thickness for 1 1/2″ x 1 1/2″ through 2″ x 2″ angle
1 3/16″ plus leg thickness for 2 1/2″ x 2 1/2″ angle 1 1/4″ plus leg thickness for 3″ through 6″ angle sizes |
| Min. Gauges (Using PFP#3 punches and dies) | 15mm (.59″) plus leg thickness for 40mm x 40mm (1 1/2″ x 1 1/2″) through 50mm x 50mm (2″ x 2″) angle sizes
24mm (.94″) plus leg thickness for anything over 50mm x 50mm (2″ x 2″) through 150mm x 150mm (6″ x 6″) angle sizes. |
| Shear – Cut to Length | |
| Shear Tonnage | 100 Tons US (91 Metric Tons) |
| Min. Remnant | 9″ (230mm) |
| Shear Cycle Time | 5 seconds |
| Slug Size | 1/2″ (12.7mm) |
| Measurement | |
| In-Feed Speed (X Axis) | 61 FPM (18.5 meters/min.) max. |
| General | |
| Machine Pass Line | 45″ (1143mm) |
| Weight | Main Assembly with Consolet – 8,500 lbs (3,860 kg)
Crate with Safety Stands & Transformer – 930 lbs (420 kg) |
| Power Requirements | 480V-60 Hz or 400V-50 Hz |
| Shop Air | 90 PSIG, 10 SCFM for machines with Unist option 90 PSIG, 50 SCFM for machines with Signoscript option None for machines without above options |
| Foundation | 6″ (100mm) concrete |
The World’s Most Affordable CNC Angle Line
The Ocean Clipper II CNC Angle Line is not only the world’s most affordable angle line, it is also the world’s most compact angle line.
The unique patented design of the Ocean CLIPPER II gives it an edge in the marketplace where processing clip angles and long bracing angles is a necessity. And the ability of the Clipper II to efficiently process short and long flat bar makes this machine so versatile.
The angle processing range is from 1-1/2” x 1-1/2 x 1/8” (40 x 40 x 4mm) up to 6 x 6 x 5/8” (150 x 150 x 15mm), in any length, and for flat bar the range is from 2 x1/4” (50 x 6mm) up to 6 x 5/8” (150 x 15mm).
The CLIPPER II uses a unique design featuring two punch units with removable C-frame tool holders, creating a dramatically more compact machine that is more user-friendly. This small compact size not only reduces the cost significantly, it also reduces the remnant to approximately 9″ (230mm).
The small footprint required and the low cost of the machine have resulted in the Ocean CLIPPER II Series being the fastest selling angle line in the world, and has made it possible for even the smallest fabricators to have their own automated angle production. Our smallest CLIPPER II angle line customers have fewer than five shop floor employees.
Capability & Design
Ocean Machinery, together with its US manufacturing partner, Peddinghaus, has created a superb new CNC angle line that breaks all the rules.
The Ocean CLIPPER II was specifically created for fabricators desiring a competitive advantage through automation by elimination of manual layout and manual punching of angles and flat bar.
The maximum angle size is 6 x 6 x 5/8″ (150 x 150 x 15mm).
It has the ability to process short clip angles as well as long bracing angles and flat bars.
The Clipper II CNC Angle Line completely eliminates manual layout, and manual drilling / punching.
Provides exceptional accuracy of hole placement, eliminating costly field modifications.
Very space efficient – much more compact than other angle lines.
Simple and easy to operate.
No computer experience required.
Fully automatic punching and shearing cycle
Immediate payback on a low investment through attractive finance options.
The Truth About CNC Angle Lines
Most fabricators who have angle lines will tell you that they seldom run their angle lines all day – they normally run in short bursts producing enough clip angles to provide the fitters clips to last the shift or possibly several shifts.
Despite only running a few hours a day, CNC angle lines still make great economic sense – producing perfectly accurate clips and other parts in the fastest possible time, eliminating huge amounts of expensive man hours, and eliminating errors. These parts fit up faster due to their accuracy and the fabricator never has to wait for deliveries from outside.
With the knowledge that the average fabricator would only run his angle line a few hours a day, Ocean Machinery and Peddinghaus decided to design and produce a completely unique machine that would do it faster and cheaper than any others on the market, and at last make angle lines affordable for the small to medium fabricator.
We closely studied the clip angle market in the USA and the rest of the world, and realized there was an opportunity for a machine that was more compact and more affordable than the current offerings.
To achieve our design approach, we needed to reduce the overall size of the typical angle line. In doing so we would also help to reduce the cost of the machine as well.
Built For Serious Duty
Despite its compact size, the Ocean CLIPPER II CNC Angle Line is designed for heavy duty work in the toughest fabricating shops in the world. It uses many of the same components found on other Peddinghaus angle lines.
The 75 Ton Hydraulic Punch is One of Peddinghaus’s standard heavy-duty units and its punching cycle is less than 2 seconds.
It has a maximum hole size of 1-1/4″ (Standard No. 270 punches).
Standard inexpensive punches and dies are available from Ocean Machinery and other vendors.
The robust 100 Ton Double Cut Shear has a cycle time of only 5 seconds and shears steel to 5/8″ thick, with a drop of only 1/2″.
With the Ocean Clipper, Peddinghaus and Ocean Machinery have succeeded in creating a powerful yet compact clip angle processing machine that eliminates another costly labor area in steel fabricating.
Credibility
The Ocean Clipper II Angle Line is the smallest form factor CNC angle line on the market today, and this is great news for fabricators who are always looking for more space in their fabricating facility.
The Ocean Clipper II’s exceptionally affordable price makes it the most cost effective clip angle solution for the small to medium fabricator.
The Ocean Clipper II Angle Line is made in the USA by Peddinghaus, the world’s leading builder of CNC steel fabricating machinery.
Peddinghaus is the most well-known and respected brand in structural steel machinery, over 110 years old
Integration With Detailing Software
The Ocean Clipper II CNC Angle Line seamlessly integrates with all major steel detailing programs.
For fabricators using any of the 3-D model detailing programs such as Tekla Structures, SDS/2, StruMIS, ProSteel-3D etc, the operator merely imports the part directly from the model.
For fabricators doing more component type work where parts might have been detailed in Inventor or Solid Works, we offer post processors that allow easy importing of the part programs.
For fabricators and miscellaneous metal shops still using AutoCAD, we offer a post processor that allows easy importing of drawings detailed in AutoCAD. However very specific drawing procedures must be adhered to for this to work satisfactorily.
