Description
GEN TURN 36 CS Twin spindle CNC Turning Center – Year 2021
SPECİFİCATİONS:
1900 Hours Operation Time
BAR CAPACITY 37 mm
POWER 10 hp
RPM 6,000 RPM
# AXIS 7
CONTROL
CNC (Super 900T Advanced Multi-Tasking CNC Control)
GEN TURN 36 CSMACHINE SPECIFICATIONS
Main Spindle:
Maximum RPM / spindle bearing 6,000RPM / 5-bearing spindle, 3-front, 2-rear
Spindle Motor 10-HP3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown& Sharpe #22 or Traub A-32
Drawtube Bore 1.456”
Maximum Barstock Diameter 1.25”standard 1.375” with adapter
Barstock Preparation Above34mm with 36mm adapter
X-axis Travel 7.28”
Y-axis Travel (true Y-axis, not compound Y) 19.29”
Z-axis Travel 6.50”
Rapid Travel Speed: X, Y, Z 1,181IPM
Minimum input unit 40millionths (0.00004”)
OD Turning Tool Positions 6OD Tools (½” ) (5-5/8” tool plate available)
ID Turning Tool Positions 5ID Tools
OD Turning Tool size ½”or 12mm (5/8”or Optional)
ID Turning Tool Bore Size 25mm
Spindle Center Height 40”
SubSpindle:
Sub spindle RPM / spindle bearing 6,000RPM / 4-bearing Quad-Duplex pairconfiguration
Sub spindle Motor 5-HP3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown& Sharpe #22 or Traub A-32
Maximum Barstock Diameter 1.250”in collet chuck (1.080” passthru)
X-axis Travel 11.53”
Z-axis Travel 11.61”
Minimum input unit 0.0001”
ID Turning Tool Bore Size 25mm
Air Blast nozzle Included
Finished Parts Ejector Included,along with parts catcher & parts conveyor belt
Live Tooling: Alllive tools are gear driven w/ ø42mm bearings – no belts!
Cross slide live tools 4-ER-20cross slide live tools, 4,000 rpm, 2.0 HP (1.5kw)
Front slide live tools 3-ER-20front slide live tools, 4,000 rpm, 1.0 HP (0.75kw)
Live tool collet size ER-20collet, Ø1/2” (0.5-13mm) tool shank capacity
Max RPM for live tools 4,000RPM
(1cross live tool can be substituted on subspindle tool block)
Machine Dimensions:
Machine Length 101” * ( * +36” for chip conveyor)
Machine Depth 68”
Machine Height 80”
Machine Weight 8,000lbs
Coolant Pump Dual50psi 3/4-HP Coolant Pumps for main and subspindle
Coolant Tank Capacity 63-galloncoolant tank, with coolant flow confirmation sensor
Lubrication distribution Waylube distributed at 3-6 cc / 15-minute cycle
Machine Power Requirements 220vac±5%, 63-amps, 3-phase, 60Hz
Air Requirements 85-PSIat 10-CFM for parts catcher, parts ejector, & air blast
Machines need stable 220 Volts, 3 Phase – Please use appropriate transformersor voltage stabilizers
Optional Equipment:
Includes Mist Buster, LNS Chip Conveyor, Fire Suppressor
The GEN TURN 36 CS is a7-axis 1.375” (36mm) bar diameter sliding headstock CNC lathe without a guidebushing. This facilitates fast set up, allows greater work piece concentricity,and provides superior cutting rigidity over conventional Swiss-style lathes.The GEN TURN 36 CS provides for short cycle-times because the Counter Spindlecan work simultaneously with the Main Spindle. The GEN TURN 36 CS does notre quire the use of ground bar stock or a guide bushing, as required with mostSwiss-style machines. No ground stock requirement and no guide bushing providesmuch shorter bar remnants. These both represent a substantial cost savings by conserving material and reducing change over time for improved profitability.
The GEN TURN 36 CSCNC is very robust and rigid machine. The heavy ribbed box cast machine weighs nearly 8,000 pounds! The machine can make aggressive rough cuts and then finish with a second tool while achieving much greater tool life on all tools. The GENTURN 36 CS allows for multiple tool passes with rough and finish cutting of allpart features. Standard Swiss machine cuts are limited to the length of the guide bushing. Longer cuts must be micro-fed at full depth with one-tool injust one-pass, which burns up expensive tooling, limiting production efficiencyand adding cost. These advantages are particularly evident in tougher materials where the capability of the GENTURN 36 CS really excels.
