Description
Haas ST-15 CNC Lathe – Year 2020
CNC TURNING CENTER w/SUBSPINDLE & HAAS SERVO BARFEED
NEW: 9/2020
CAPACITIES
Chuck Size 8.3 in
Max Part Swing 16.5 in
Max Cutting Diameter (with BOT turret) 12.00 in
Max Cutting Length (varies with workholding) 16.0 in
Bar Capacity 2.50 in
TRAVELS
X Axis 7.9 in
Z Axis 16.0 in
FEEDRATES
Rapids on X 1200 ipm
Rapids on Z 1200 ipm
AXIS MOTORS
Max Thrust X 3300 lbf
Max Thrust Z 3300 lbf
SPINDLE
Spindle Nose A2-6
Max Rating 20.0 hp 14.9 kW
Max Speed 4000 rpm
Max Torque 150.0 ft-lbf @ 500 rpm
Spindle Bore ø 3.50 in
SUB-SPINDLE
Chuck Size 5.3 in
Spindle Nose A2-5
Max Speed 6000 rpm
Max Sync Speed w/Main Spindle 4800 rpm
Chuck Throat Ø 1.30 in x 1.37 in DEEP
Drawbar Bore (non-through) Ø 1.00 in x 4.50 in DEEP
Spindle Bore (without chuck and drawbar installed) 1.50 in
Rapids (B-axis) 400 ipm 10 m/min
TURRET
Number of Tools 12-Station HYBRID BOT/VDI
OD vs ID Tools Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret ) 0.75 in
GENERAL
Coolant Capacity 30 gal 114 L
ELECTRICAL SPECIFICATION
Spindle Speed 4000 rpm
Drive System Direct Speed, Belt Drive
Spindle Power 20.0 hp 14.9 kW
Input AC Voltage (3 Phase) – Low 220 VAC
Full Load Amps (3 Phase) – Low 40 A
Weight 7900 lb
EQUIPPED WITH:
– HAAS CNC CONTROL
– AUTOMATIC TOOL PRESETTER
– 8″ SAMCHULLY 3-JAW HYDRAULIC CHUCK ON MAINSPINDLE
– 5″ 3-JAW HYDRAULIC CHUCK ON SUBSPINDLE
– PARTS CATCHER
– 6,000 RPM SUBSPINDLE
– HYBRID BOT/VDI TURRET
– 300 PSI HIGH PRESSURE COOLANT
– AUXILIARY COOLANT FILTER SYSTEM
– AUTO DOOR
– WiFi CAMERA
– BELT TYPE CHIP CONVEYOR
– HAAS BARFEEDER
– ALL AVAILABLE TOOLHOLDERS
MACHINE IS IN EXCELLENT CONDITION, 106 FEED CUTTING HOURS
ROTA-RACK PARTS ACCUMULATOR AVAILABLE FOR ADDITIONAL COST
