Description
Koenig & Bauer Kammann K15 – Year 2016
CNC S10 3 Color UV Screen Printing Machine
Condition:used
Year:2016
Serial number:11744
Printable substrates:Glass, Plastic, Metal
Printable article shapes:Round, Oval, Squares, Hexagons, etc.
Article diameter:Single Article: 20mm – 120mm; Double Article (2-up): 20mm – 80mm
Print image length:270mm
Registration accuracy:+/- .10mm
Printing speed (single article):Rounds 70 articles/minute (4,200 articles/hour); Ovals 65 articles/minute (3,900 articles/hour); Squares 65 articles/minute (3,900 articles/hour)
Printing speed (double article):Rounds 140 articles/minute (8,400 articles/hour); Ovals 130 articles/minute (7,800 articles/hour); Squares 130 articles/minute (7,800 articles/hour)
Electrical requirements:480 Volts, 60 Cycles, 3-Phase
Air requirement:Approximately 6 bar pressure
Gas requirement:Propane: .23 cbm/h, 50-100 mbar (.73 – 1.45 psi); Natural Gas: .60 cbm/h; 20-100 mbar (.29 – 1.45 psi)
Barely used Kammann K15 UV screen printing machine with K31 pretreatment machine and DeCoSystem print inspection system.
Kammann K15 CNC-S10 Automatic 3 Color UV Screen Printing Machine & Kammann K31 A-FS Silane Pre-Treatment Machine
Screen Printing Machine Features:
+ Motorized CNC control for all variable movements of the machine, including computerized adjustment of print image length, adjustment of article rotation, adjustment of squeegee stroke, and vertical screen and squeegee lifting for non round articles.
+ Indexing table with 10 article holder stations controlled by programmable servo drive, each with single-capture tooling capable of holding one article between a base holder and nose cone for maximum control.
+ Quick change system for nose cones and base cups that hold the articles in the machine.
+ 3 servo‐controlled printing stations with micro screen adjustment, motorized X‐direction adjustment, manual Y‐direction adjustment, and Z‐direction adjustment. Print stations can be rotated to print the article from top‐to‐bottom (longitudinal printing). Servo control for screen cleaning and screen changes. Motorized height adjustment for different article diameters.
+ 3 pneumatic‐controlled squeegee heads, with micro adjustment of squeegee angle, horizontal position, and vertical position. Supplementary flood bars with height adjustment.
+ 3 custom Kammann UV curing units (UV bulbs included.) Maximum output of 250 watts/cm. UV curing operation control via touch panels. Manual height adjustment of focal distance. Automatic climate control for UV lamps.
+ Optical sensor for detection and registration of an existing print.
+ Bottom camera for detection of registration mark.
+ Touch panel controls on 2 sides of the machine for programming and managing most of the machine operations, article contour calculations, UV controls, article management, safety system management, and maintenance management.
+ Infeed conveyor and extended exit conveyor with frequency‐controlled drive motors that sync with the printing speed.
+ Separation worm screw for control of article spacing.
+ Internet connection for remote monitoring, trouble shooting, and software updates.
+ Automated “No Article – No Print” system.
+ Safety monitoring system and UV shielding for all access doors.
+ Air inflation for printing thin-walled plastic or aluminum articles.
+ Climate controlled electrical cabinet.
+ DeCoSystem print quality inspection system. Automated 100% inspection for print defects. High resolution camera with illumination. Adjustable detection levels and software control. Automatic ejection system for articles that are identified with quality defects.
+ Operating manuals, wiring diagrams, and other operating documents included.
+ Built in 2016 by Kammann GmbH and installed by Kammann GmbH.
+ Current number of print impressions: 123,566
Pre-Treatment Machine Features:
+ Fully automatic dual stage flame pre-treatment unit for glass, aluminum, or plastic articles.
Stage 1: Dual, high output ribbon burners with electronic ignition and controlled gas/oxygen mixture. Automated pivoting burner motion with motorized drive for complete 360° article surface preparation. Synchronization with the speed of the K15 CNC-M15 printing machine.
Stage 2: Dual ribbon burners with electronic ignition and controlled silicone di-oxide (silane) application for improved application and durability of UV inks on glass or ceramic articles. Automated pivoting burner motion with motorized drive for complete 360° article surface preparation. Synchronization with the speed of the K15 CNC-S10 printing machine.
+ Separation worm screw for control of article spacing.
+ Cabinets for electronics, gas control (natural gas or propane), and silicone di-oxide (silane) control.
+ Sura Instruments evaporator and control system for silicone di-oxide (silane) application.
+ Stainless steel article conveyor electronically controlled in-sync with K31A-FS pre-treatment machine and K15 CNC-M15 printing machine. Adjustable conveyor height. Adjustable guide rails.
+ Motorized exhaust blower system for each pre-treatment stage.
+ Touch panel control for programming and managing most of the pre-treatment machine operations.
+ Protective safety shielding and safety monitoring system.
+ Built and installed in 2016 by Kammann GmbH.
