Description
Fanuc Robocut Alpfa α-1iC Wire EDM – Year 2005
Manufacturer: Fanuc
Model Year: 2005
Model: Robocut Alpha-1iC
Condition: Used. This equipment is in Fair cosmetic condition with the usual blemishes from use.
Notes: This system is in good working condition. It is currently under power and is being used regularly. It is available for inspection at our facility
Included:
(1) Fanuc a-0C EDM
(1) 16-WC NC unit
(1) Operating Panel Fanuc Series 180is-WB
(1) Fluid Unit
(1) Water cooling unit
(1) Wire collection box
(1) Water filtration unit
(1) pendant controller
(1) OPERATORS MANUAL (CUTTING TECHNOLOGY WITH POWER SUPPLY) B-85054EN-2/01
(1) OPERATORS MANUAL (AWF) B-85054EN-3/01
(1) OPERATORS MANUAL (CUT MONITOR) B-85054EN-5/01
(1) OPERATORS MANUAL (V 1 OF 2) B-85054EN/03
(1) OPERATORS MANUAL (V 2 OF 2) B85054EN/03
(1) PARTS MANUAL B-85076EN-1/01
(1) MAINTENANCE MANUAL B85055EN/02
(1) SAFETY PRECAUTIONS AND NOTES ON EFFICIENT USE B-00509EN/01
Specifications:
Manufacturer: Fanuc
Robot model: a-1iC
Type: A04B-0316-B003#U5
Robocut CNC wire-cut EDM
NC unit: 16-WC series
Submerged type
With automatic wire feed
Maximum workpiece dimensions: 650 x 450 x 180 mm
Maximum workpiece weight: 1000 kg
Table stroke: 520 x 370 mm
Z-axis stroke: 310 mm
U and V axis stroke: 60 x 60 mm
Maximum table feedrate: 900 mm/min
Minimum table travel: 0.00001 mm
Maximum taper angle: +/- 30º /80 mm
Rapid traverse feedrate: 900 mm/min
Cutting feedrate: 0.0001 to 50 mm/min
Manual feedrate: 100, 200, or 300 mm/min
Maximum workpiece thickness: 300 mm
Maximum workpiece thickness for underwater wire feed: 180 mm
Dielectric fluid unit capacity: 930 L demineralized water
Fluid uint filtering flow rate: 65 L/min
Filter type paper filter x3
External dimensions 970x1525x1090mm
Power requirement: 208V 3phase 50/60Hz 13kVA plus compressed air
Manufactured: 2005-07