Description

Takisawa FX800 – Year 2019

capacity
Standard turning diameter 210 mm
Max. Turning diameter 260 mm
Max. Turning length 657 mm
Bar capacity  65 mm
Distance between the two spindle surfaces max. 1030 / min 300 mm

Traverse paths and rapid traverses
Travels
X1 axis = 215 mm Z1 axis = 750 mm

X2 axis = 215 mm Z2 axis 745 mm

Y-axis = ± 50 mm B-axis = 800 mm

Rapid traverses
X1 axis = 20 m / min Z1 axis = 20 m / min
X2-axis = 20 m / min Z2-axis = 20 m / min

Y-axis = ± 10 m / min B-axis = 20 m / min

Main spindle
Spindle speeds 4,500 rpm
Lining size 8 inches
Spindle nose A2-6
Spindle bore Ø 76 mm
Bearing diameter 110 mm

Counter spindle
Spindle speeds 5,000 rpm
Lining size 8 inches
Spindle nose A2-6
Spindle bore diameter 63 mm
Bearing diameter 110 mm

drive
Spindle motor (30 min. / 100% ED) AC 11/15 kW
Counter spindle motor 7.5 / 11 kW
Milling motor 3.7 / 5.5 kW
Turret motor 1.2 kW
X1 / X2-axis servo motor AC 1.2 kW
Z1 / Z2-axis servo motor AC 2.5 kW
B-axis servo motor AC 2.5 kW

Driven tools
Number of tool stations on the turret 2×16 stations
Number of revolvers 2
Turning tool shank 25 mm
Drive power (30 min. / 100% ED) 1.5 / 3.7 kW
Drilling up to Ø 40 mm
Milling up to Ø 1-20 mm
Milling speed

Electrical connections
200 V, 50 Hz, 3 phases ?? kVA

Physical data
Height of the machine 2,340 mm
Width of the machine 2,334 mm
Length of the machine 3,530 mm

Net weight approx.12,300 kg

Basic machine version

Machine bed in 45 ° inclined bed arrangement, Meehanite casting
Hardened and precision ground flat guideways in X1, X2, Z1, Z2, Y and A axes
Precision ball screw drive, preloaded
Splash protection device with safety lock
Switch cabinet with heat exchanger
Swiveling control panel
Removable electronic handwheel
2 pieces TAKAMAZ tool turret with 12 stations / servomotor swivel drive
Individual drive for driven tools
C-axis control via swiveling servo motor, including disc brake
Main and counter spindle

control
CNC path control FANUC 0i-TF
with display
Color monitor 10.5 ”
Manual Guide i Dialog programming

Technical specifications
Controlled axes 8
Simultaneously controlled axes 4 per channel
smallest input resolution 0.001 mm
0.001 °
smallest output resolution 0.001 (Z) 0.0005 (X) mm
0.001 (C) °
Incremental and absolute input options
Electronic handwheel
Number of correction memories X and Z 16 each per channel
Program memory size 80 m / 32 K characters per channel
Number of storable programs 63
Tool offsets absolute and additive
Thread pitches 0.001 mm / rev to 99.9999 mm
Distance measurement with an incremental pulse encoder
Automatic program, sentence and character search
Position display switchable (relative / absolute / machine)
Diagnostic function
Test run
Single sentence
Programmable travel limitation
Backlash compensation
Zero offset in the program
Dwell times (G04)
limited speed programming (G50)
(important at constant cutting speed)
Thread cycles (G32 G76)
Multiple cycles (G70 ~ G76)
Drilling Cycles (G80 ~ G89)
Radius Compensation (G40 ~ 42)
Background editing
Set parameter data (G10)
Custom macro B
Spindle phase synchronization
Detect abnormal load
Synchronous machining with 2 turrets on one spindle (G68, G69)
Cylindrical interpolation on the lateral surface
Polar coordinates interpolation
Explanation of the machine alarm for the last 60 alarms

Interfaces: RS232C
Memory card
USB

Standard accessories

Coolant device
a coolant pump GRUNDFOS 550W for flushing chips
1 coolant pump per turret
movable jet arm on main and counter spindle
Blow air for cleaning the clamping device on the main and sub spindle

Part catcher
Swiveling parts catcher on the sub-spindle with conveyor belt to the right

interface
Interface for loading magazine

Hydraulic power clamping system
Hydraulic hollow clamping cylinder SMW Autoblok on the main spindle
Hydraulic hollow clamping cylinder SMW Autoblok on counter spindle

Electrical connection
Main transformer, 400 volt input voltage, 200 volt output voltage

Tool holders and tools
1 set of set-up tools
3 double holders for external machining (25 x 25 mm) main / counter spindle
2 holders for internal machining ( 40 mm) main / counter spindle
1 base holder for full drills ( 40 mm) main / or counter spindle
1 tool holder for face grooving (25 x 25 mm)
1 parting holder (25 x 25 mm)

CE conformity
CE declaration of conformity