GLEASON 24A Gear Hobbing Machine Universal Bevel CONIFLEX Straight

Contact us for price

Categories: ,

Description

GLEASON 24A Gear Hobbing Machine Universal Bevel CONIFLEX Straight

Condition:used
Longest cone distance (1 3/4″ stroke):18″ (457MM)
Shortest cone distance:0″
10 to 1 ratio:35.5″ (901MM)
2 to 1 ratio:31.75″ (805MM)
1 to 1 ratio:25″ (635MM)
Minimum pitch angle:5.42 DEGREES
Extreme ratio:10 TO 1
Maximum pitch:1.25 DP (20.4 MODULE)
Maximum pitch angle (shafts at 90 degrees):84.18 DEGREES
Maximum face length:6″ (152MM)
Diameter (large end of taper):6″ (152MM)
Taper per foot:.75″ (18MM)
Depth of taper:6″ (152MM)
Diameter of thru bore:5” (127MM)
Spindle nose to machine center:5”-26” (127-660MM)
Cutter speeds (strokes per minute):22 TO 170
Feeds (seconds per tooth) (22 feeds):23 TO 645
Floor space required:74″ X 105″ (1880X2660MM)

Machine net weight:24,400 LBS. (11,295 KGS)

COMBINATION ROUGHER/FINISHER, SUITABLE FOR “GENERAL JOBBING”
PRODUCTION OF STRAIGHT BEVEL (CONIFLEX/CROWN) GEARS UP TO 35.5
(901MM) PITCH DIAMETER, (AT 10:1 RATIO), 6″ (125MM) FACE-WIDTH,
WITH CUTTING CAPABILITY UP TO 1.25 DP (20.4 MODULE)

EQUIPMENT / FEATURES:
UNIVERSAL FEED CAM, DOUBLE-TRACK, FOR ROUGHING
AND/OR FINISHING WORK
HYDRAULIC CHUCKING ATTACHMENT (LESS DRAW-BAR & NUT)
SELF-CONTAINED HYDRAULIC SYSTEM
COUNTER/STOP
STOCK DIVIDING GAUGE
ROUGHING YOKE & BUSHING
FINE-FEED ADJUSTMENT FEATURE
ONE SINGLE SET-UP OF CHANGE GEARS
FOR INDEX, ROLL, RATIO OF ROLL, FEED AND SPEED
GLEASON AUTO-STOP
GUARDS/COVERS AND OPERATORS STEP PLATFORM
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)

NOTE: PREVIOUS OWNER ADVISES SLIDES WERE REBUILT by a company APPROXIMATELY ONE YEAR AGO.

Related products