GLEASON PHOENIX 175HC – Year 1997

Contact us for price

Categories: ,

Description

GLEASON PHOENIX 175HC – Year 1997

CNC SPIRAL BEVEL GEAR GENERATOR
NEW 1997

SUITABLE FOR THE CUTTING OF SPIRAL BEVEL AND
HYPOID GEARS AND PINIONS UP TO 8.5″ (216MM)
DIAMETER VIA “FACE-MILLING” AND 7.5″ (190MM) VIA
“FACE-HOBBING” METHOD

EQUIPMENT / FEATURES: ( EACH MACHINE )
MACHINE FURNISHED WITH MACHINE MOUNTED,
AIR-CONDITIONED, ELECTRICAL ENCLOSURE, OPERATOR’S
CONTROLS LOCATED AT FRONT OF MACHINE, ADJACENT
TO POWERED ACCESS DOOR.
FANUC MODEL 150MB COMPUTER CONTROL WITH SPIRAL
BEVEL GEAR CUTTING SOFTWARE AND AUTOMATIC SET-UP,
WITH 10.4″ LCD FLAT COLOR DISPLAY.

WORK SPDL (A) SWINGING BASE (B) CUTTER SPDL (C)
HORIZONTAL (X) VERTICAL (Y) SLIDING BASE (Z)
SUMMARY STORAGE CAPACITY FOR 100 PARTS.
SECURITY KEY FOR CONTROL OF SET-UP.
CYCLE FAULT MONITORING
PRODUCTION AND SHARPEN – CUTTER COUNT DISPLAY
HYDRAULIC WORK-PIECE CHUCK (W/DRAW-ROD & NUT).
WORK SPINDLE BORE (3-29/32: (#39 TAPER).
TOTALLY ENCLOSED WORK AREA GUARDING WITH POWERED
ACCESS DOOR.
WORK CHAMBER LIGHTING
FOOT SWITCH FOR HYDRAULIC CHUCKING OF WORK-PIECE
POWER FORCED LUBRICATION SYSTEM TO ALL WORKING
elements
SELF CONTAINED COOLANT SYSTEM (PUMP TANK & PIPING)
(W/OPTIONAL COOLER CHILLER UNIT)
MAGNETIC CHIP SEPARATOR (24″ CHIP EXIT HEIGHT)
ELECTRICAL EQUIPMENT FOR 380 VOLT, 50 HZ, OR
460 VOLT, 60 HZ, 3-PHASE
INSTALLATION. CONTROL CIRCUIT IS 115 VAC WITH
24 VDC INPUT/OUTPUT.
ELECTRICS TO COMPLY WITH PHOENIX NFPA 79-1987

Condition:used
Year:1997
Root angle range (b axis):-5 ° TO 90 DEG.
Equivalent root angle range:-5 ° TO 90- DEG;
1:1 6.750″ (171.00MM)
2:1 8.500″ (216.00MM)
5:1 8.500″ (216.00MM)
Maximum full depth:0.625″ (16.00MM)
Maximum face width:1.600″ (40.65MM)
Maximum swinging base travel (b-axis):5 ° TO 90°
Maximum vertical travel (y-axis):(-102MM TO178MM)
Max horizontal travel (x-axis):(-152MM TO 102MM)
Sliding base travel (z-axis):(51MM TO 304MM)
Machine center to work spdl face (fixed):(114.30MM)
Tooth number:5 TO 200 INCLUSIVE
Conventional face milling:(100MM-200MM)
Fine pitch:(102MM TO 152MM)
Coarse pitch:(152MM ONLY)
B-axis – swinging base (degrees per second):30°/SEC.
A-axis – work spindle (face milling) (rpm):0-75
A-axis – work spindle (face hobbing) (rpm):0-375
C-axis – cutter spindle (rpm):30-500
X-axis – horizontal:4.92″/SEC(125MM/SEC)
Y-axis – vertical:4.92″/SEC(125MM/SEC)
Z-axis – sliding base:4.92″/SEC(125MM/SEC)
(face mill), ds, hhr:FANUC 30S/3000 20K
(face hobb), ds, hhr:FANUC 30S/3000 20K
C-axis – cutter spindle dig spdl:FANUC 15P 1024
X-axis – horizontal, ds:FANUC 5S/3000 10K
Y-axis – vertical, ds w/brake:FANUC 5S/3000 10K
Z-axis – sliding base, ds:FANUC 5S/3000 10K
-coolant, ac induction:3 HP
-hydraulic, ac induction:3 HP
Floor space:(2432X1613MM)
Height (less mist collector:90.75″ (2305MM)
Weight (approx.):18,000 LBS(8,200 KG)

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products