FMB TURBO Handling – Year 2015

Contact us for price

Category:

Description

Brand: FMB
Model: TURBO
Year: 2015

Specs:
FMB TURBO 2-20 Swiss Bar Feeder
Bar diameter capacity-no bar preparation: 2 mm to 20 mm (.078” to .787”)
Bar diameter capacity-with bar preparation: 2 mm to 23 mm (.078” to .905”)

Maximum bar length: 3800 mm (12 feet 5 inches)
Minimum bar length: 1000 mm (39.400”)
Maximum remnant length: 420 mm (16.540”)

Magazine rack capacity: 7”
Bar loading cycle time: 30 seconds for 12 foot bar
Material straightness specification: .007” TIR/foot of material (V blocks, 3 points equidistant)
Feed force (pusher torque): max 300 N, adjustable
Forward feed rate: 710 inches/minute max, adjustable
Return feed rate: 1420 inches/ minute max, adjustable

Power consumption: 1.5 kW – (2 kVA)
Operating voltage: 230V/60Hz 3-phase
Control voltage: 24V DC
Oil capacity: 50 liters (13.2 gallons)
Oil viscosity: ISO 100 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 3 liters per loading cycle
Machine weight (without oil): 1,650 lbs
Automatic loading magazine — 7 linear inches of rack capacity
Double pusher, space saving design
Quick-change polyurethane guide channel system – noise & vibration dampening
Hydrodynamic support via high volume oil flow into channels
Omron motion control — dependable and user friendly, allows easy bar feeder parameter changes
Bearing block steady rest. Super rigid design is mounted to base of the machine to provide maximum support of bar stock and pusher

Separate floor mounted electric cabinet isolates electronics from vibration
(1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See chart on next page. (spindle liner required if channel set is not lathe’s max capacity)
(1) Universal telescoping front nose and (1) nose I.D. liner specific to pusher
(1) O.D. bar stock collet (to be chosen by customer, specific collet needed for each stock diameter)

Swiss headstock synchronization device
Automatic remnant retraction, self centering gripper
Custom lathe cable and interface plugs
Polyurethane bushing blocks (2 pieces)

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products