Description
| Power in tons | 315 T |
| Type | H-Frame |
| Table length | 1500 mm |
| Table width | 1300 mm |
| Distance between columns | 750 mm |
CNC hydraulic press SMG DS 315 – 1500/1300 315 tons for stamping, double. The offer applies to two presses (positions cannot be separated). Presses built in 1984 in Germany, renovated in 2007 (new pumps, controls, safety). They are adapted to automatic production.
Characteristic data of the CNC SMG 315 T press:
– pressure: up to 315 tons
– dimensions of the working table: 1500 x 1300 mm
– machine opening, upper point of machines: 750 mm (from the table)
– lower point of the machine: 440 mm (from the table)
Press equipment:
– sensors for controlling the feeding and falling of details
– sheet feeders
– safety cages
Characteristics of the presses:
The presses are equipped with a CNC control, thanks to which all pressing parameters can be determined. Embossing, progressive, automatic presses worked with the whole line for unwinding and straightening the sheet. They work in manual, semi-automatic and automatic modes. Two different sheet feeders are mounted on the presses: hydraulic and pneumatic.
Technical data of the hydraulic sheet metal feeder:
– hydraulic control
– sheet width: 600 mm
– sheet thickness: 1-6 mm
The feeding rolls are driven by a servo drive – you can set a very precise feeding stroke, up to 0.1 mm.
Technical data of the pneumatic sheet feeder:
– pneumatic control
– sheet width: 900 mm
– sheet thickness: 1-6 mm
The feeding rolls are driven by a servo drive – you can set a very precise feeding stroke, up to 0.1 mm.
