• Victor Taichung Vturn-A26/85 – Year 2012

    Contact us for price

    Category:

    Description

    Victor Taichung Vturn-A26/85 CNC Lathe
    Year 2012
    Never Used,
    Still In Crate

    Capacity
    Swing over bed: 35.43in
    Between centers: 35.8in
    Max. turning dia.: 16.5in
    Std. Turning dia.: 13.4in
    Bar capacity: 2.95in

    Travels
    X axis stroke: 8.27+1.97in
    Z axis stroke: 33.4in

    Spindle
    Max. spindle speed: 3,500 RPM
    Spindle nose: A2-8
    Spindle bore: 3.38in
    Inner bearing: 5.12in

    Turret
    No. of tools: 12
    Tool shank size: 1in
    Max. boring bar dia.: 2.0in
    Exchange time: 0.3 sec
    Exchange time (sec) (including disk up
    & down): 1.05 (Adjacent), 1.44 (Opposite)

    Tailstock
    Quill diameter: 4.33in
    Quill taper: MT#5
    Quill stroke: 3.94in
    Feedrate
    Rapid traverse rate (ipm): X: 945 Z: 945
    Cutting feed-rate (ipm): X/Z=0~50

    Motor
    Spindle motor (Hp): (aB200Mi-15/22) 20 / 30
    Servo motor (Hp): X: 5.4 Z: 5.4

    Power Requirement
    Standard machine: AC 220V, 3 ph, 50 KVA
    Coolant Tank capacity (gal): 95

    Machine
    L×W×H: 190in×83in×77in
    Net weight: 16,720lbs

    Equipped with:
    Fanuc Oi-TD Control
    Fully Programmable Tailstock
    Chip Conveyor
    Air conditioner for electrical cabinet
    Spindle Oil Cooler
    Coolant Flush on Z-axis Cover
    Complete Coolant System
    10″ Kitagawa 3-Jaw Thru-Hole Hydraulic Chuck & 1 Set Soft Jaws
    Hand-wheel (remote MPG)
    Tool Holders
    3-step Warning Light
    Splash Guard
    Machine Lighting
    Toolbox And Tools
    Machine And Fanuc Instruction Manuals
    Leveling Block
    Leveling Plates
    Plug For Chuck Bore
    Taper Slice 5 each
    Mounting block 5 each
    Face and O.D. cutting Toolholder 2 each
    Face and I.D. cutting Toolholder 1 each
    Clamp block 3 each
    Boring Bar Holder 2” dia. 1 each
    Boring Bar Holder 1½” dia. 3 each
    ‘U’ Drill holder 1¼” dia. 1 each
    Boring Bar Sleeve 1½” dia. 2 each
    Boring Bar Sleeve 1” dia. 2 each
    Boring Bar Sleeve ¾” dia. 2 each
    Boring Bar Sleeve 5/8” dia. 2 each
    Boring Bar Sleeve ½” dia. 2 each
    Boring Bar Sleeve 3/8” dia. 2 each
    U-Drill socket 1” 1 each
    Drill socket M.T.3 1 each
    End cap for ‘U’; drill holder 1 each
    Coolant block 5 each

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products