Mori Seiki NT 1000/WZ – Year 2010

Contact us for price

Category:

Description

Mori Seiki NT 1000/WZ – Year 2010

X – Axis Travel: 15″
Y – Axis Travel: + / – 4.1”
Z – Axis Travel: 18.1″ + 6.1″
X – Axis Travel: TRT 2 6.1″
Z – Axis Travel: TRT 2 24″
C – Axis Travel: Main / Sub .0001 Deg.
B – Axis Min. Index Angle / Index Range: -120 – +120 DEGREE
B – Axis Spindle Speed: HSC 20,000 RPM
Tool Spindle: 12 HP

Number Of Tool For Tool Spindle: 38 ATC
Spindle Nose: No 1, No 2 A2-5 / G6 Flat Nose
Hole Through Spindle: No 1, No 2 2.4” / 2.2”
Bar Work Capacity: No. 1, No 2 2.0″/1.5”
Main Spindle Motor: 15 HP
Sub Spindle Motor :10 HP
Spindle Speeds: No 1, No 2 6000 / 1000 RPM
Rapid Traverse Rate: X, Y, Z, A 945, 945, 629, 300 IPM
Turret Configuration: 10
Turret Indexing Time: .26 Sec.
Machine Weight: 19,690 LBS.

Equipped with:
1st Spindle Orientation 1st Spindle Output Switching Function
3d Interference Check With Open Cnc Function 3rd / 4th Reference Return
99 Tool Offsets A1 Contour Control Ii Function Axis Compensation
Air Blow For Spindle 1 Air Blow For Tool Tip Spindle
Auto Power Off Automatic Data Backup
Balanced Cutting Bell – Shaped Acc. / Dec. After Cutting Feed
Controllable Axis Compensation, Control Axis
Number, Simultaneous Axis Expansion Cs – Axis Contour Control
Custom Macro B Diameter / Radius Dynamic Switching
Interpolation Type

Embedded Ethernet And Fast Ethernet Software Fast Data Server
High Pressure Coolant Chip Blaster System High Speed Skip, Serial Spindle Interface
High Speed Tool Spindle 20,000 Rpm Hssb Interface Board
In Machine Work Piece Measuring System Optical
Touch Sensor Renishaw Omp 60 Inch/Metric Conversion
Main Spindle Kitagawa 6″ Hollow Chuck Package Lns Quickload 80 Servo S2 Short Magazine Barfeed

Mori Seiki NT 1000/WZ CNC Lathe, 2010 – Spindle Orientation, High Pressure Coolant, Bar Feeder
Maximum Swing Of Work Piece: 14.5″
Swing Over Cross Slide: 14.5”, Turret 2 11.8”
Maximum Turning Length: 16.6”

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products