• Okuma LU-45 2SC – Year 1997

    Contact us for price

    Category:

    Description

    Okuma LU-45 2SC – Year 1997
    CNC Lathe Dual Turret, OSP 7000L

    Swing Over Bed: 33.07″
    Swing Over Saddle: 21.85″
    Distance Between Centers: 78.74″
    Maximum Turning Diameter: 25.98″
    Maximum Work Length: 78.74″

    X-axis Travels: Upper Turret 17.32″/ Lower Turret: 12″
    Y-axis Travels: Upper Turret 82.28″/ Lower Turret 79.72″

    Speed: 2400 Rpm
    Number Of Speed Ranges: 4 Ranges
    Spindle Nose: Jis A2-11
    Spindle Bore Diameter: 4.33″
    Diameter At Front Bearing: 5.91″
    Turret Type: Upper Turret V12 / Lower Turret V10
    Number Of Tool Stations: Upper Turret 12 / Lower Turret 10
    Tool Shank Height: 1.26″ X 1.26″
    Boring Bar Shank Diameter: 2.48″
    Turret Indexing Time: 0.7 Seconds (lift Up)
    Rapid Traverse Rate (x,z): 591 Ipm / 787 Ipm
    Cutting Feed Rate: 0.0001-40.0 Ipr

    Tailstock Quill Diameter: 5.12″
    Tailstock Quill Bore Taper: Mt 5 (built-in)
    Tailstock Quill Travel: 6.69″

    Spindle Motor: 60/50 Hp
    Coolant Pump Motor: 0.7 Hp
    Power Kva: 54.3

    Machine Height: 119.69″
    Machine Floor Space: 238.58″ X 111.49″
    Machine Weight: 45,540 Lbs

    Equipped With:
    Okuma OOSP 7000L CNC Control
    20″ Chuck
    Dual Turret
    Tailstock
    Chip Conveyor
    Approximately 70 Assorted Tool Holders

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products