American Wheel Truing Rail Lathe – Year 1998

Contact us for price

Categories: , ,

Description

American Wheel Truing Rail Lathe – Year 1998
Machine Specifications  ( To the best of our knowledge)

Machine Dimensions

 Fabricated Beam Maximum Length 128 in. 3148 mm
 C-Frame Maximum Width 245 in. 6315 mm
 C-Frame Maximum Height 117 in. 2917.8 mm
 Total Weight 45000 lbs. 19143.67 kg

Pit Dimensions

 Length 325 in. 8574 mm
 Width 315 in. 7947 mm
 Depth 122 in. 3065  mm

General Specifications

 Production Up to 10 wheel sets
per 8-hour shift
 Diameter Accuracy +/- 0.020 in. +/- .5 mm
 Eccentricity +/- 0.020 in. +/- .5 mm
 Profile Accuracy +/- 0.010 in. +/- .25 mm
 Surface Finish 200 RMS axially,
150 RMS on wheel circumference
 Milling Cutter Speed 30 RPM
 Hydraulic Centering Ram Force 6600 lbs. 2.9 kN
 Hydraulic Hold-Down Force 15 tons 133 kN

Utility Requirements

 Electrical Power 76 kW
 Hydraulic Reservoir 90 US gallons 340.69 liters

Wheel Set Dimensions

 Maximum Wheel Diameter 58 in. 1475 mm
 Minimum Wheel Diameter 23 in. 585 mm
 Maximum Axle Load 50 tons 445 kN

Like New (284 Hrs since installed new in 1998) American Underfloor Wheel Truing Machine is an underfloor pit-mounted milling machine, capable of simultaneously re-profiling both wheels of a railway wheel set using the axle centers as the machining reference point. It is capable of profiling wheel sets to necessary specifications for tape size, concentrically and plane dimensions in any of the following situations: Machine includes 6 Milling Heads –

1- While the wheel set is under a locomotive, passenger or freight car, transit vehicle, or other rolling stock.
2- While the wheel sets are mounted in a truck.
3- While the wheel set is demount-ed as a single set.
The Machine will re-profile both wheels simultaneously to equal diameters, leaving a witness groove at the flange of the profile.

Both wheels of a wheel set will be finished automatically to the diameter that is required to clean up, while removing the minimum amount of metal possible.

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products