Kampf Schneid-Und Wickeltechnik Gmbh 72 X 0.015 X 40 000 LB

Contact us for price

Categories: ,

Description

Kampf Schneid-Und Wickeltechnik Gmbh 72 X 0.015 X 40 000 LB
ALUMINUM SLITTING LINE

Year : 2001
Line Reinstalled in 2016

Catalogue Specifications

Material Processed: Alum. Alloys 1145, 1100, 3003, 7072 & 8111
Temper: 0 Thru H19
Strip Thickness Range: 0.002″ – 0.015″
Coil Capacity: 40,000 lbs
Entry Speed Width Range: 25″ – 72″
Line Speed Max: 2600 FPM
Depending on Material Type, Thickness, Spool, Core, Slitting Width

Unwind Reels

Coil O.D.: 24″ – 90″
Spool Size I.D. / O.D. / Length: 23.75″ x 26″ x 72″
12.812″ x 16″ x 66″
12″ x 16″ x 27.5″
Unwind & Coil Stands to be designed to take up future spool length of 76″
Rewind Reels
Reels Diameter O.D.: 18″ – 72″
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Spool / Core I.D.: 6″ , 10″ , 12″ , 16″
Fibre Cores
Slitting System: Scissors Cut / Optional Square Knife
Maximum 40 Cuts Plus Edge Trim
Slitting Width Range: 0.6″ – 46″
Exit Reels Diameter O.D. Max: 72″
Exit Reels Diameter O.D. Min: 18″
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Spool / Core I.D.: 6″ 10″ 12″ 16″ 20″
Edge Trim Min / Max: 0.5″ – 2″ per Side
Slit Width Tolerance: +/- .004″
Jogging Speed (Approx): 32.8 FPM
Acceleration / Deceleration: VO – V Max. in approx. 80 s
Instantaneous Stop: V Max – V0 in approx 40 s
Emergency Stop: V Max – V0 in approx 10s
Winding Tension / Unwind: Max 12.65 N
Winding Tension / Rewind 1: 318 – 6328 N / 25% Taper Tension at OD
Winding Tension / Rewind 2: 318 – 8438 N / 25% Taper Tension at OD
Elongation Unit Capability: 1.5 – 3% with a target of 2%
Machine Design: Drive Side on Right As Seen in Running Direction
Voltage: 480V + 10-20% AC, 3 Phase, 60 Hz
Control Voltage: 24V
Total Supply Value: 700 KVA
Air Continuous Pressure: >/- 77 PSI
Consumption Approx: 14.9 SCFM
Water Flow: 53 cu. ft. / hour

EQUIPPED WITH:

Main Machine
Drive Side on the Right
Unwind with Stepped Expanding Heads
Stretch Stand
Two Slitting Cassettes
Pusher Plates on Rewinds
Drives, Motors and SPS from Siemens
Siemens Programming Unit w/ Modem and Programs
Winding Shafts
2 Rewind Shafts 6″
2 Rewind Shafts 10″
2 Rewind Shafts 12″
2 Rewind Shafts 16″
Handling For Unwind Side, Including:
Coil Car with Fixed Saddle
Core Roller Table w/ Core Deposit
Two Coil Deposit Stand Non-Driven (Spools 66″ , 72″ , 76″)
Empty Spool Roller Table w/ Spool Deposit
Handling For Rewing Side, Including:
2 Finish Roll Transport Carts
Edge Trim, Chopper & Transport, Air Seprator, Diverter Gate, Vacuum Hose, Maintenence Platform

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products