Description
Baileigh PR-10500-4CNC Plate Bending Machine – Year 2023
| Baileigh | PR-10500-4CNC |
|---|---|
| Rolling Cap. (Mild Steel) | .55″ |
| Forming Width | 122″ |
| Number of Rolls | 4 |
| Driven Rolls | 2 |
| Top Roll Dia. | 13.7″ |
| Bottom Roll Dia. | 13″ |
| Slide Roll Dia. | 9.8″ |
| Roll Adjustment | Hydraulic |
| Programming | Touch Screen CNC System |
| Motor | 15 hp. |
| Power | 480V / 3-phase |
| Shipping Weight | 28600lbs |
| Shipping Dimensions (Inches) | 206″ x 68″ x 43″ |
This plate roller has the same rigid steel structure as its sister models (PR-10500-4 and PR-10500-4NC) but incorporates a CNC touchscreen controller specially designed for Baileigh.
Made in Italy and refined through years of research.
½” mild steel capacity.
120” (10-foot) length.
Large 10 hp motor runs on 480-volt 3-phase power.
FORMING ROLLS AND HYDRAULICS
All 4 forming rolls are hardened and polished.
2 central driven rolls.
Dual hydraulic motors and high-efficiency planetary gearboxes directly rotate the 2 driven rolls.
4-roll design pinches the plate between the 2 driven rolls, pre-bends the leading edge, and rolls the part along with the trailing edge in one pass.
Front rolls have independent hydraulic lifters that go in the orbital pattern.
Stabilizer torsion bar system keeps front rolls parallel to the top roll.
Plate is pinched at all times during the rolling cycle, so there’s no chance to lose the position.
You can adjust the angle of the rolls and bend cones.
Hydraulic system for material removal: yoke on top roll drops, allowing the roll to lift.
CNC PROGRAMMER AND CONTROL PANEL
Simply draw or load your desired shape, choose the type of material, and the computer automatically generates the program to bend your desired shape.
15” touchscreen display (TFT new generation LCD LED) conforms to Rohs regulations.
CAD system allows you to draw shapes to be bent with the NC.
You can also load shapes in DXF format from USB pen-drive.
Configure your desktop or laptops with CAD to create shapes, then export them to the CNC.
Front panel with more input/output ports: 2 USB, 1 Serial, 1 Ethernet, 2 PS2.
Amount of steps per program is virtually unlimited.
Pre-existing system of manual programming “auto-teaching” ensures total flexibility of control.
Linux RTI operating system.
New generation motherboard conforms to Rohs regulations.
Integrated graphical card with accelerated 3D hardware.
Intel Low power 2.0 GHz Dual Core CPU with lower operating temperature (optimal for industrial environments).
SO-DIMM DDR Memory 1 GB Industrial range.
Direct connection of the LVDS display leaves VGA port open for connecting an external monitor.
Tripled calculation capacity, compared to previous versions.
WARRANTY AND AFTER-CARE
Covered by a 1-year parts warranty.
Comes with lifetime technical support by phone from our in-house team of knowledgeable reps.
