Description

Okuma L300-MW – Year 2011
CNC Horizontal turning center with interceptor, driven tools with P200L control – 2 pcs.
vintage 2011

the given price is for 1 item (an additional discount is possible when buying both)

Both machines in very good technical condition, in continuous operation and service. Collision-free machines (max. spindle runout up to 0.005mm). Machines “upstream” the possibility of performing tests or trial machining;

Swiss bar feeders 3 meters, hydraulic LNS
One machine with Hydrobar 6.42 feeder (up to 42 mm shaft diameter)
Second machine with Hydrobar 6.52 feeder (up to 52 mm roller diameter)

Machines equipped with a basic set of holders + Hainbuch holders + Hainbuch sleeves for various diameters (the price does not include driven holders visible in the pictures);

Additional equipment
Bar loader LNS Super Hydrobar HYS 6.52 (6.42 on the second machine)
Workpiece receiver matched with manual tool measuring probe
Bar feeder interface
High pressure pump 1.5 MPa (capacity 20l/min.)

Basic parameters:
Swing over the bed: Ф 520 mm
Swing over carriage: Ф 170 mm
Maximum turning diameter: Ф 300 mm
Maximum turning length: 150 mm

Journeys:
in X axis: 230 mm (+195 / -35)
in the Z axis: 460 mm (V12 head)
in the W axis (interception): 520 mm
in the C1 axis: 360° (every 0.001°)
in the C2 axis: 360° (every 0.001°)

Main spindle:
Spindle revolutions: 25 – 3,000
Spindle Nose: JIS A2-8
Spindle bore: Ф80 mm
Front bearing diameter: Ф120 mm
Motor power: 11 / 7.5 kW
Torque: 417Nm

sub spindle:
Spindle speed: 133 – 6,000 rpm
Spindle end: flat, Ф140 mm
Spindle bore: Ф53 mm
Front bearing diameter: Ф80mm
Motor power: 7.5 / 5.5 kW
Torque: 48Nm

Tool head:
Head type: V12 NC turret VDI30, radial setting
Number of tools: L/M: 12
Tool shank height: 25 mm
Shank diameter: Ф40mm
Indexing time: 0.3s/index (increment)
Tool rotation range: 100-4,500 rpm
Power: 7.0 / 3.3 kW (25 min/cont)
Torque: 24Nm

Shifts:
Rapid traverse:
in the X axis: 20 m/min
in the Z axis: 25 m/min
in the W axis: 25 m/min
in axis C1, C2: 200 rpm
X cutting speed; Z: 0.001 – 1,000.000mm/rev

Drives:
Spindle drive power: 11 / 7.5 kW (30 min./cont), 417 Nm
Counter spindle drive power: 7.5 / 5.5 kW (30 min./cont), 48 Nm

Pass drives:
in the X axis: BL 2.5 kW
in the Z axis: BL 3.8 kW
in the W axis: BL 2.0 kW
Cooling system pump: 0.25 kW
Overall dimensions, weight:
Height: 1,852mm
Occupied area: 3,031 x 1,856 mm
Weight: 5,300 kg

Tailstock : no
Bar feeder : no