HARDINGE CONQUEST T 42 SP – Year 1997

Contact us for price

Category:

Description

HARDINGE CONQUEST T 42 SP – Year 1997

Turning length 300 mm
Turning Ø 150 mm
Ø above transversing slide 300 mm
Type of CNC FANUC 18 T
X-axis 380 mm
Z-axis 190 mm
Spindle taper VDI 30
Spindle bore 48 mm
Number of turrets 12
Turning speed 6000 rpm
Spindle motor power 11 kW
Tailstock no
Bar feeder no
Weight 7500 kg

CNC-Hard Turning Machine with WP-Loader
Maker HARDINGE (USA)
Type CONQUEST T 42 SP

very good. Machine can be inspected under power

Swing Ø above slide, max. approx. 300 mm
Max. Workpiece Size using collet chuck Ø x Length 140 x 270 mm
Max. Turning Length approx. 300 mm
Spindle bore 48 mm
Material admission 42 mm
Spindle speeds, infinitely variable 60 -6,000 rpm

Turret: 12-position for square shaped Cutting Tool tips 25 x 25 mm and for shaft shaped cutting Tools VDI 30 with some tool holders mounted on the outer diameter of the turret.
Turret slide travel, longitudinal Z Axis / cross X Axis 380 / 190 mm
Feed speeds, Z / X / Y 38 / 28 m/min
Feed power, Z / X / Y 6,5 / 5 kN
Tool holder shank square / round 25 / 32 mm
Indexing time from station to station 0.36 sec

Sub Spindle Head
Spindle bore / spindle nose 42 mm
Synchronized spindle speeds 60- 6.000 mm
Feed rates for Z / X axis 38/28 m/min.
Feed Torque Rate Z/X/Y 6,5/5 kN
Spindle drive 11/7,5 kW
Total electrical load, approx. 23 kW – 400 V – 50 Hz

Accessories / Special Features

FANUC CNC Control in 2 axes, Model 18 T, with colour monitor and all of the usual multi-tasking functions, graphics, cycles and subprograms, etc.
The Main spindle is equipped with a Quick Change Collet Device, prepared for the automatic loading and unloading of Workpieces
Equipped with a SUB SPINDLE opposite of main spindle allows end working on workpieces
12-Station Turret Head with some tool holders but no live tools
Built in chip conveyor, Ampere meter for main and sub spindle outside on the control panel
Optical adjustment device for exact tool setting, Lockable sliding doors, CE Sign

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products