Description

Amada CTB400 Carbide Vertical Band Saw – Year 2012

Rounds Cutting Capacity (Diameter): 1.18″ – 16″
Rectangle Cutting Capacity, (Min. W x H / Max. W x H): 1.18″ x 0.5″ / 16″ x 16″
Work Load Capacity: 5,512 lbs.
Saw Blade Size (L x T x W): 186″ x 0.055″ x 1.5″
Saw Blade Speed: 50 FPM – 492 FPM
Saw Blade Motor: 10 hp
Hydraulic Pump Motor: 2 hp
Cutting Fluid Pump Motor: 1/4 hp
Wire Brush Motor: 1/8 hp
Electricals: AC220+/-10%, 3ph, 60 hz
Power Requirement: 16.6 kVa
Front Shuttle Vise Stroke: 11.8″
Rear Shuttle Vise Stroke: 15.7″
Shuttle Vise Length (Front + Rear): 0.39″ – 393.7″
Number of Input Blocks and Stations: 30 blocks, 10 stations per block
Number of Cut-Off Pieces: 1-999
Remnant Length: 0.59″

Equipped With:
CNC Blade Control
Hydraulic Tension Control
In and Out Conveyor

Manufacturer Catalogue Information about Amada CTB400 Band Saw :

The Amada CTB400 Band Saw fully automatic, enclosed CNC vertical band saw is developed for high production, accuracy, and economic cutting.
This band saw is a state of the art machine specifically designed to use the multifaceted Amada carbide band saw blade.
The combination of these two has achieved an excess of 95cm/min cutting rates, surface finishes in the range of 62 RMS while holding accuracy’s well within the + – 0.05/mm of diameter.
The world’s first CNC OPTIMAL CUTTING CONTROL (patent pending) presets feeds and speeds according to material specification.
This unit has 229 factory installed material specs, with 100 available for custom materials. Feeds and speeds are automatically set to achieve the most economical cutting with the highest productivity possible, while maintain noise levels below 85 decibels.
Cutting Capacity Round: 16.93″
Cutting Capacity Angular (W x H): 16.93″ x 16.93″
Saw Blade Motor: 10HP
Hydraulic Pump Motor: 2 HP
Cutting Fluid Pump: 0.24 HP
Wire Brush: 0.12 HP
Saw Blade Speed: 50-492 FT/Min
Vise Clamp Width (Front and Rear): 1.18-16.93″