Description
| Type | horizontal |
| X Axis | 2000 mm |
| Y Axis | 1000 mm |
| Z Axis | 1100 mm |
| CNC type | HEIDENHAIN iTNC 530 |
| Max. spindle speed | 3000 rpm |
| Table length | 2200 mm |
| Table width | 850 mm |
| Max load on table | 5000 kg |
| Spindle taper | ISO 50 |
| Spindle motor power | 38 kW |
| Overhauled | no |
| Anayak Performer 2000 | |
| Length x width x height | 5500.0 × 4000.0 × 2900.0 |
| Weight | 14000 kg |
Technical data of the ANAYAK PERFORMER 2000 bed milling machine
– dimensions of the work table (length x width): 2200 x 850 mm
– feeds in the X/Y/Z axes: 2000/1000/1100 mm
– feed speed in the X/Y/Z axes: 10000 mm/min
– accelerated feeds in the X/Y/Z axes: 20000 mm/min
– maximum load on the work table: 5000 kg
– minimum spindle speed: 60 rpm
– maximum spindle speed: 3000 rpm
– two-stage spindle speed adjustment
– number of T-slots: 5
– T-groove width: 22 mm
– spacing of T-slots: 150 mm
– milling head indexation: -180°/+177.5° every 2.5°
– positioning of milling head angles: automatic in A+B planes
– positioning accuracy: ±0.014 mm
– repeatability: ±0.008 mm
– engine power: 38 kW
– diameter of ball screws in the X/Y/Z axes: 63 mm
– passage of the ball screw in the X/Y/Z axes: 16/10/10 mm
– power of the hydraulic unit: 1.8 kW
– working pressure of the hydraulic unit: 110 bar
– tank capacity of the hydraulic unit: 100 l
– hydraulic pump capacity: 9 l/min
– cooling unit power: 1.36 kW
– air pressure: 6-7 bar
– air flow: 50-225 l/min
– power supply: 400 V 50 Hz
– dimensions (length x width x height): 5500 x 4000 x 2900 mm
– total weight of the PERFORMER 2000 machine: 14000 kg
Equipment of the ANAYAK PERFORMER 2000 CNC milling machine
– CNC control: HEIDENHAIN iTNC 530
– detail probe: RENISHAW RMP60
– swivel milling head
– cooling through the spindle
– spindle taper: ISO 50
– DTR – technical and operational documentation
ANAYAK PERFORMER 2000 bed CNC milling machine was manufactured in 2007 in Spain. The swivel milling head with automatic positioning in the A+B planes used in the machine enables precise machining of large-size details with a maximum weight of 5000 kg. A significant reduction in milling time is ensured by a high-performance milling spindle with two-stage speed control in the range of 60 to 3000 rpm.
In the working space of the CNC milling machine there is a solidly made table with a length of 2200 mm and a width of 850 mm, on which the CNC milling machine performs machining of details in the X, Y, Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 ( Z-axis). The CNC bed milling machine is equipped with e.g. control panel with the HEIDENHAIN iTNC 530 CNC controller installed, used for e.g. programming the operating modes of the machining center, cooling through the spindle and the RENISHAW RMP60 detail probe. The CNC machining center weighs 14,000 kg.
