Atrump E320 – Year 2005

Contact us for price

Category:

Description

Atrump E320 – Year 2005
CNC Vertical Machining Center

SPECIFICATIONS
Table: 16” x 41” (405 x 1040 mm)
Longitudinal travel (X axis): 33.9” (860 mm)
Cross travel: 20” (510 mm)
Vertical travel: 24” (610 mm)
Spindle nose to table top (D): 4.8”-28.8” (122-732 mm)
Load capacity: 1500 lb (680 Kg)
Spindle taper: CAT40
Spindle Speed (r. p.m.): 6000 rpm
Transmission of spindle & motor: Belts
Spindle center to column front surface: 21.7” (550 mm)

Feed Rate:
Rapid feed rate: X/Y/Z: 150 ipm DC, 320ipm AC
Cutting feed rate: 1-120 ipm DC; 160ipm AC

Motor:
Spindle motor/max torque: 10 HP/38 Ft-LB. (50 NM)
Feed motors on XYZ: 40 in/lbs. DC, or AC 1 KW
Coolant pump: 1/8 HP.
Lubrication pump: 150 Watt
Power requirement: 17KVA, 3 Phase 208-230 voltage
Automatic Tool Changer
No. of tools: 16
Max. tool diameter: 3.54” (90 mm)
Max. tool length:
Max. tool weight: 15.4 lbs (7 Kg)
Length X Width X Height (LXWXH): 98.4” x 85” x 90”
Net Weight: 6,820 lbs. (3100 Kgs)

This is a beautiful machine.
It has been well taken care of with one owner.
The machine was used for proto-type and tooling work and saw light use in mostly aluminum.
It holds very tight tolerances, and as you can see by the pictures, is immaculately clean and ready to start cutting your parts.
The machine was new in 2005 and can be upgraded to the latest Centroid Control at any time.
Machine comes with a Kurt Vise and Cat 40 tool holders.

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products