Description
BENDMAK FMB Flanging Machine
Condition : New
Technical specifications:
– The machine frame built of high strength materials by electro welding and stress relieved prior to the machining in order to meet tight manufacturing tolerances for sensitive flanging process.
– Upper and lower head holder slides on the main body structure for stiffness and lower vibration during flanging.
– Both upper and lower head holders powered by hydraulic motors for vertical movement and clamps the head by hydraulic cylinders.
– Knuckle roll is powered by radial piston by hydraulic motors for high speed of rotation and high torque.
– Flanging roll is powered by three cylinders for vertical and horizontal direction and slides between two main bodies.
– Both rolls are made of special chemical for long time corrosion resistance
– Centralised greasing system.
– Lower supporting rolls are powered by hydraulic cylinders to support the head during flanging.
– Hydraulic system consist of radial piston pump, oil tank level gauge, filter with impurity signal and worldwide known brands.
Manufacturing Catalogue Information about BENDMAK FMB Flanging Machine :
Flanging Machine
FMB
Bendmak flanging machines are designed for speed and burn to run. It is accurately engineered for lowest vibration during flanging and robustness.
The whole consturctions is electro-welded and stress relieved.Fully hydraulic control and proportional valves are for accurate setting during the flanging so it is simply operated even by new operator who doesn’t have any experience on metal forming.
It is protected against wrong setting and overload by very special hydraulic system engineered. Automatic flanging function (optional) available to flange in shortest time without taking care the material thining.
Diameter range 500 – 10.000 mm.
Thickness range 2 – 50 mm (cold), 100 mm hot!
With or without center hole available
You may require producing the bottom with or without center hole. Both are available in our range..
Would you like to flange very thin material?
With or without center hole, thin or thick, stainless or mild steel…
Don’t worry, BMB will flange all of them material-friendly operation and lowest surface roughness.The correct capacity of model is being choosed based on the material thickness, quality and plate diameter like BMB-P.
Customer focus is our priority
Since the investment cost is always one of the important parameter to invest, BENDMAK decided to focus on function in priority.The standard dishing press and flanging machines are designed only for basic customer needs. You don’t need to think about what is really needed or not since our experts will assist you to create right machine configuration. OR, Specify your application and send us so we will offer an appropriate solution.
It is designed to produce pressure vessel, navy, nuclear, food, power generation, petrochemical, shipyard industries.
Lowest vibration during flanging
The whole machine is engineered to give lowest vibration during flanging. This is one of the main expectation and a benchmark to compare with the others.The high vibration leads to short life-time break or wearing on many components of the machine.
The components are choosen best quality for low maintenance after long life-time.Many design features, to avoid operator error, safety and aspect well engineered.
Skilled Operator is not an issue anymore
Since the flanging operation seems difficult compare to other metal forming, you are right to be afraid.
Thanks to special automation and user friend interface to get rid of this issue.It is very easy to learn and operate for any unskilled operator now. Very easy to control, high accuracy and repetation on the cycles.
Standart Features
The frame of the machine is made by high alloy steel and MIG welded. The frame is also stress releived to process to have tighter tolerances after welding operation
Both upper and lower head holders driven by hydraulic motors and hydraulic cylinders
Knuckle roll is driven by radial piston hydraulic motor for high speed rotation and torque
Flanging roll is driven by 3 cylinders for vertical and horizontal direction and slides between two main bodies
The dies are made of special steel with heat-treated
A special primer applicated on all body before painting for a long term corrosion resistance
Centralized lubrication system by hand pump operation
Lower supporting rolls are powered by hydraulic cylinders to support the head during flanging
Hydraulic system consists of pump with radial piston, level and temperature gauge of oil tank, filter with impurity indicator
