• Daewoo Doosan Puma 2100SY – Year 2012

    Contact us for price

    Category:

    Description

    Daewoo Doosan Puma 2100SY – Year 2012
    CNC Turning Center

    Manufacturer: Doosan
    Model: Puma 2100 SY
    Year: 2012

    Specifications:
    Max Swing Over Bed 30.7″
    Swing Over Front Door 26.8″
    Max Swing Over Carriage 24.8″
    Max Bar Capacity 2.6″
    Max Work Piece Diameter 15.98″ (main)
    Max Turning Length 20.47″
    Distance between Main & Sub 33.46″

    MAIN SPINDLE:
    Spndle Nose ASA-A2-6
    Draw Tube ID 2.68″
    Spindle Bore Diameter 2.99″
    Spindle Speed 5,000 RPM
    Spindle Motor 30 HP

    MAIN SPINDLE C-AXIS:
    Minimum programmable angle (degrees) 0.001
    Rapid traverse rate (RPM) 400
    C-axis contouring torque 70 Ft/Lb
    C-axis braking torque 663 Ft/Lb
    C-axis repeatability +/- 0.006 deg.
    C-axis positioning accuracy 0.0167 deg.

    BED, SADDLE, & CROSS SLIDE:
    X axis travel 10.2″
    Z axis travel 23.2″
    Angle of slant bed 30 Degrees
    X & Z axis rapid traverse rate 1,181 IPM

    TURRET:
    Number of tools 12
    Number of index positions 24
    Tool holder type BMT 55P
    Turning tool shank size 1″
    Boring bar diameter, main spindle 1.5″
    Boring bar diameter, sub spindle 1″
    Tool selection Bi-directional

    ROTATING TOOLS:
    Rotating tool RPM 50 – 5,000 RPM
    Rotating tool spindle motor 7.5 HP
    Rotating tool collet type ER25
    Milling collet capacity 1/8″ to 5/8″
    Max. tool length facing sub-spindle 3.94″
    Max. X-axis tool length with Y-axis 3.8″

    Y-AXIS:
    Y-axis travel 4.13″ (2.065″)
    Y-axis rapid traverse rate 394 IMP
    Y-axis repeatability 0.00012″

    SUB-SPINDLES:
    Sub Spindle Speed 6,000 RPM
    B axis travel (sub-spindle) 23.2″
    Sub-spindle guideway span 13.2″
    Spindle motor 20 HP
    Spindle nose A2#5
    Spindle Bore 2.44″
    Draw tube ID 1.97″
    Rapid traverse rate 1,181 IMP
    Minimum programmable angle 0.001 degree (full C axis)

    Equipped With:
    Fanuc 31i-T CNC Control
    Chip Conveyor
    8″ (3) Jaw Chuck (main)
    6″ (3) Jaw Chuck (sub)
    3J Collet Chucks
    Parts Catcher & Conveyor
    LNS Quick Load Servo 80 Barfeed
    (11) Liners
    Coolant System with Skimmer
    Tool Eye
    RS232
    All Available Manuals
    Catalog Specifications: No Mist Collector, No Quick Change Collets

    GENERAL:
    Floor space (Length X Width) 125″ x 74″
    Machine height 85″
    Height from floor to spindle center 43.7″
    Net weight 13,000 lbs
    Voltage required 205 – 235 volt / 3 phase
    Power requirement: 49 KVA (129 amps at 220 volts)

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products