• DIXI 350 TCA 50 CNC 4400 – 1988 Model

    Contact us for price

    Category:

    Description

    DIXI 350 TCA 50 CNC 4400 – 1988 Model

    Control: DIXI 4400E-CNC
    Screen: 12 “tube screen

    axes
    X-axis travel mm: 1000
    Y-axis travel mm: 1000
    Z-axis travel mm: 1000
    4th axis, NC table, B-axis, smallest division, degree: 0.005
    Number of axles pc .: 4

    Measuring systems
    X-axis: direct measuring system
    Y-axis: direct measuring system
    Z-axis: direct measuring system
    B-axis: direct measuring system

    palette
    Dimension mm: 1000 x 840
    Workpiece weight max. Kg: 2000
    Number of pallets pieces: 1
    Interference circle max. On the pallets mm: 1244
    max.workpiece height mm: 1000

    Indexing: 0
    Changeover time sec .: 0
    Table height above floor mm: 1200

    spindle
    Spindle speed rpm: 3000
    Spindle drive power kW: 11
    Torque Nm: 105
    C-axis positioning: yes
    Ø spindle: 195
    Min. Y value over table: 97

    Tool system
    Tool holder: SK 50

    Tool magazine
    Tool magazine places St .: 50
    MAPPS magazine control panel at the tool input station: manual main and secondary control panel at the tool transfer station
    Tool changer: double gripper
    Tool diameter mm: 145
    Tool diameter with free neighboring spaces mm: 320
    Tool length max. Mm: 420
    Tool weight max. Kg: 20
    Change time tool – tool sec .: 9
    Changeover time chip – chip: 16
    Tool cleaning: yes

    Feeds
    Rapid traverse (X / Y / Z) m / min: 5
    Feed rate (vf) m / min: 0.001 – 5

    Cooling system
    Cooling by spindle bar: no
    Coolant temperature control: no
    Cooling capacity kW: no
    Coolant system: no
    Internal coolant supply: no
    Paper belt filter: no
    Magnetic separator: no

    Furnishing
    Workpiece measurement: no
    Tool breakage, tool length measurement: no
    Hsvfjxhh

    additional M functions
    Spindle C-axis function: yes
    Part program memory: floppy disk
    Software for reading in tool data via chip: no
    Rotating viewing window in the work door: no
    Timer for warm-up phase: yes
    Function of automatic start warm-up phase: yes
    Signal lamp: no
    electric handwheel: yes
    Preparation for network integration: yes

    Basic machine dimensions
    Length approx mm: 4835
    Width approx mm: 2700
    Height approx mm: 3140
    Weight approx kg: 17000
    Total power requirement kVA: 47

    Documentation: yes

    Errors in the technical data reserved.

    very well-maintained jig boring machine DIXI 350 TCA / 50

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products