DMG MORI CLX 350 – Year 2017

Contact us for price

Category:

Description

DMG MORI CLX 350 – Year 2017
CNC turning center with bar feeder IEMCA KID 80/16

Brand : DMG MORI
MODEL : CLX 350
Y.O.M.: 2017

Technical specifications of the DMG MORI CLX 350 CNC lathe
maximum turning diameter: 320 mm
maximum turning diameter (above slide): 400 mm
maximum turning diameter (over bed): 610 mm
recommended maximum turning diameter: 250 mm
turning length in Z axis: 530 mm
feed rate in the X/Z axis: 242.5/580 mm
rapid traverse in the X/Z axis: 30/36 m/min
maximum bar diameter: 51 mm
maximum spindle rotational speed: 5000 rpm
spindle passage: 73 mm
internal diameter of front spindle bearing: 120 mm
spindle main drive power (40% / 100% ED): 16.5/11 kW
spindle torque (40% / 100% ED): 168/112 Nm
lathe chuck: fi 210 mm
chuck diameter: 210/250 mm
swarf hopper capacity: 120 l
swarf conveyor capacity: 170 l
hydraulic unit capacity: approx. 10 l
maximum hydraulic unit pressure: 55 bar
compressed air pressure: 6 bar
air consumption: 15 m3/h
maximum power requirement: 28 kVA
power supply: 400 V; 50/60 Hz
lathe dimensions with swarf hopper (L x W x H): approx. 2800 x 1780 x 1850 mm
DMG MORI lathe dimensions with swarf conveyor (L x W x H): approx. 3680 x 1780 x 1850 mm
Equipment of the CNC turning centre CLX 350

CNC controller: Siemens Sinumerik 840d sl 4.7
bar feeder: IEMCA KID 80/16
tailstock type: hydraulic
number of VDI tools: 12
tailstock sleeve socket: MK 4
spindle tip: A2-6
tool socket acc. to DIN 69880 (VDI 3425)

The DMG MORI CLX 350 CNC turning center was built in 2017 by the Japanese company DMG Mori Seiki. The lathe has a spindle that can rotate at a maximum speed of 5000 rpm. The maximum turning diameter is 320 mm and the Z axis turning length is 530 mm. Additionally, the machine is offered as a set with bar feeder IEMCA KID 80/16 from 2017.

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products