• DMG MORI NTX2000SZM – Year 2013

    Contact us for price

    Category:

    Description

    DMG MORI NTX2000SZM – Year 2013
    CNC Turn Mill Multi Tasking Machine

    This NTX2000SZM is in very good condition and runs extremely well.
    It has only been regularly maintained by DMG MORI service engineers.

    The machine is one of the most flexible multi tasking machines on the market offering turning and 5 axis simultaneous milling with two spindles and the lower turret with driven tools for machining on both spindles to maximise production or balance turning for long parts.

    It boasts a comprehensive specification with many options as follows,

    NTX2000/1500SZM_F31iB5
    – Fanuc Control F31iB5
    – Spindle 1 – bar machining capacity: φ80 mm (spindle speed 4,000 rpm, 26/22 kW)
    – Spindle 2 – through hole diameter: φ65 mm (spindle speed 5,000 rpm, 22/18.5 kW)
    – KITAGAWA 10″ Hollow Chuck on both spindle 1 & 2.
    – Lower Turret – 10 station with driven tools up to 6,000 rpm.
    – Spindle 2 tailstock specifications.
    – Tool storage capacity 76 tools (Capto C6).
    – 70 bar high pressure coolant unit including twin cartridge filtration system.
    – Chip conveyor (right discharge, hinge type) (/1500).
    – Automatic in-machine tool pre setter for tool spindle and turret 2.
    – Workpiece unloader (spindle 2 workpiece receiver) (with workpiece conveyor).
    – Bar feeder Interface.
    – Spindle 2 workpiece ejector.
    – Chuck foot switch (double) for spindle 1, 2.
    – Signal tower 3 layers (Red, yellow, green) LED type.
    – 5 external M-codes.
    – Manual pulse generator (separate type).
    – Input /Output I/F（RS232C).
    – Transformer (120Kva, CMT150K/2/1).

    Additional Options on request at additional cost,
    – Filtermist FX4002.
    – Hydrafeed Bar Feed MX1B short (1.5M).
    – Some Capto C6 tool holders and front end tooling.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products