• DMG Mori Seiki NTX1000 2nd Generation CNC MultiTasking Turn-Mill Center Machine – Year 2019

    Contact us for price

    Categories: ,

    Description

    DMG Mori Seiki NTX1000 2nd Generation CNC MultiTasking turn-Mill Center Machine – Year 2019

    Maximum Workpiece diameter 16.9”
    Maximum workpiece length 31.5”
    Maximum bar diameter 2.6”
    Maximum X-axis travel 17.9”
    Maximum Y-axis travel 8.3”
    Maximum Z-axis travel 31.5”

    Simultaneous 5-axis machining of complex parts with the direct drive motor
    Installed in the B-axis
    The B-axis rotation range of 240° and rotation speed of 100 rpm, the X-axis
    Travel of 17.9”
    Thoroughly controlled thermal displacement by cooling oil circulation in the body
    High-rigidity bed and linear motion guide achieve high rigidity

    Control F31iB5 with CELOS
    CELOS – ERGOline Touch
    (Spindle 1) through-spindle hole dia. 73 mm, 5,000min-1 (bar work capacity dia. 65 mm)( for FANUC)
    Standard spindle (spindle 2) 11/7.5 kW, 6,000min-1 (for FANUC)
    (Spindle 1) KITAGAWA 8IN. Hollow chuck BB208A621
    (Spindle 1) Hollow Cylinder set for KITAGAWA 8in. Chuck BB206A621 (without chuck body)
    (Spindle 2) KITAGAWA 6IN. Hollow chuck BB208A621
    (Spindle 2) Hollow Cylinder set for KITAGAWA 6in. Chuck BB206A621 (without chuck body)
    High-speed tool spindle, 20,000 min-1, 9/5.5 kW, 49.4 Nm (15%ED)/21.9 Nm (C5/HSK-A50)
    Capto C5
    Tool spindle full indexing specifications (STD)
    10 Station Bolt-Tightened Turret, milling specifications (10,000 min-1, 1.5/1.2 kW, 4.8/2.3 nM)
    (Turret 2) (for FANUC)
    Drilling with the tailstock (live center specifications)
    Tool storage capacity 76 tools (Capto C5)
    Usable Coolant Type: Water-Soluble Coolant
    Chip Conveyor (Right Discharge, hinge type + drum filter type)
    Interface for Super-High-Pressure Coolant System (7MPa, Constant Pressure) (Through-spindle coolant system for tool Spindle)
    Through-spindle coolant/ air (switching specifications)
    Coolant Chiller
    Coolant Gun
    Air blow for chuck (Counter Spindle)
    Interface for Mist collector (duct only, dia. 200mm)
    Manual in-machine tool presetter (removable type) (STD)
    In-machine workpiece measuring system radio signal transmission type touch sensor (RENISHAW, RMP600)
    Signal lamp 4 colors (Red, yellow, green, blue)
    Automatic Door
    Interface for Bar Feeder (LNS) (multiple)
    Multi dry filter
    Voltage of Customer Factory 220 V
    Frequency 60Hz
    Setting Unit Inch
    Alternating speed
    3D Quick SET
    Addition of optional block skip (soft key type 2-9)
    X-axis Direction JIS / ISO standard

    Equipped with:
    Milling head has Y axis, Turret does not have Y axis
    35 Milling tool holders per machine – 8 – 10 tool holders for turret per machine
    Tool Holders Only NO cutting tools

    Approx Run times between 4500 hrs to 6000 hrs

    Options for all machines Renishaw Probe, Blum Laser tool Setter/monitor,
    Mist Collector, Hainbuch Spanntop main Chuck , Royal 3J Subspindle collet Chuck,
    20,000 rpm B Axis Spindle, 10,000 rpm Turret Milling.
    The 2019 Has High press. Coolant
    the 2 2020 machines do not have high press. Coolant
    The 2 2020’s have Automatic door, Coolant Chiller
    The 2019 Does not have Automatic door, Coolant

    Overall dimensions approx.. 178.5” x 100.1” x 101.8” High for each machine
    Weight for each machine 25,353 lbs approx..

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products