Description
The milling center DUGARD EAGLE 1000 VMC was built in 2002.
Characteristic data of the CNC milling machine:
CNC control: SIEMENS
table size: 1200 x 450 mm
table load: 600 kg
T-slots: 5 x 18 x 75 mm
X axis travel: 1020 mm
Y axis travel: 510 mm
Z axis travel: 510 mm
Spindle:
spindle taper: 7/24, BT-40
spindle speed: 80-8000 rpm
overhang, distance from the center of the spindle to the body: 550 mm
distance from the spindle face to the table: 150-660 mm
Feeds:
working feeds: 1-7600 mm / min.
accelerated feeds of the X, Y, Z axes: 30/30/18 m / min.
Accuracy:
repeatability: + -0.003 mm
positioning accuracy: + -0.005 mm
Tool magazine:
tool magazine: 20, carousel type
maximum tool diameter: 89 mm
maximum tool weight: 7 kg
tool holder: BT-40
Engine:
spindle motor (30 min.): 16 HP; 12 kW
drive motor (X, Y, Z): 5.6 HP; 4.2 kW
coolant pump: 0.38 kW
Other machine data:
required machine power: 15 kVA
voltage: 3-phase, 380/400 V
frequency: 50/60 Hz + – 1 Hz
voltage tolerance: + – 10% or less
Air required: 80 PSI, 5 kg / cm2
usable area (L x W x H): 2830 x 2741 x 2532 mm
machine weight: 5000 kg