Fanuc Robocut Alpfa α-1iC Wire EDM – Year 2005

Contact us for price

Category:

Description

Fanuc Robocut Alpfa α-1iC Wire EDM – Year 2005
Manufacturer: Fanuc

Model Year: 2005

Model: Robocut Alpha-1iC

Condition: Used. This equipment is in Fair cosmetic condition with the usual blemishes from use.

Notes: This system is in good working condition. It is currently under power and is being used regularly. It is available for inspection at our facility

Included:

(1) Fanuc a-0C EDM
(1) 16-WC NC unit
(1) Operating Panel Fanuc Series 180is-WB
(1) Fluid Unit
(1) Water cooling unit
(1) Wire collection box
(1) Water filtration unit
(1) pendant controller
(1) OPERATORS MANUAL (CUTTING TECHNOLOGY WITH POWER SUPPLY) B-85054EN-2/01
(1) OPERATORS MANUAL (AWF) B-85054EN-3/01
(1) OPERATORS MANUAL (CUT MONITOR) B-85054EN-5/01
(1) OPERATORS MANUAL (V 1 OF 2) B-85054EN/03
(1) OPERATORS MANUAL (V 2 OF 2) B85054EN/03
(1) PARTS MANUAL B-85076EN-1/01
(1) MAINTENANCE MANUAL B85055EN/02
(1) SAFETY PRECAUTIONS AND NOTES ON EFFICIENT USE B-00509EN/01
Specifications:

Manufacturer: Fanuc
Robot model: a-1iC
Type: A04B-0316-B003#U5
Robocut CNC wire-cut EDM
NC unit: 16-WC series
Submerged type
With automatic wire feed
Maximum workpiece dimensions: 650 x 450 x 180 mm
Maximum workpiece weight: 1000 kg
Table stroke: 520 x 370 mm
Z-axis stroke: 310 mm
U and V axis stroke: 60 x 60 mm
Maximum table feedrate: 900 mm/min
Minimum table travel: 0.00001 mm
Maximum taper angle: +/- 30º /80 mm
Rapid traverse feedrate: 900 mm/min
Cutting feedrate: 0.0001 to 50 mm/min
Manual feedrate: 100, 200, or 300 mm/min
Maximum workpiece thickness: 300 mm
Maximum workpiece thickness for underwater wire feed: 180 mm
Dielectric fluid unit capacity: 930 L demineralized water
Fluid uint filtering flow rate: 65 L/min
Filter type paper filter x3
External dimensions 970x1525x1090mm
Power requirement: 208V 3phase 50/60Hz 13kVA plus compressed air
Manufactured: 2005-07

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark
     or  Wire  Transfer  or   Credit Card


Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 

1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.