Description

Ficep TIPO B 254 CNC Plate Processor – Year 2014
CNC Plate Processing Machine

Brand: Ficep
Model: TIPO B 254
Year: 2014

Loading Fee: Rigging Required

Specifications

Max Plate Length: 20′
Minimum Plate Length: 8.2′
Max Plate Width: 8.33′
Minimum Plate Width: 20″
Max Punching Force: 1000 kN
Max Stripping Force: 100 kN
Max Hole Diameter in Punching: 3.93″
Max Diameter on 20MM (0.78 “) Thickness: 1.5″
Minimum Plate Thickness: 0.19″
Max Plate Thickness for Punch: 0.98″
Max Thickness for Plasma: 1.5″ or 2.5″ with Edge Start
Max Positioning Weight: 11,022 Lbs.
Max Longitudinal Transfer Speed: 98 ‘ / Minute
Cross Positioning Speed: 131′ / Minute
Working Height: 43″
Equipped With

38 Position Marking Unit, Powered Infeed Rolls, CNC Master and Slave Controls, Hypertherm HPR 260 Plasma Power Source, Chip Conveyor, Donaldson Torit Dust Collector, Punch Tooling

 

Manufacturer Catalogue Information : 

FICEP Model Tipo B

Side address material positioning system for reduced footprint and increased accuracy.
Rack and pinion positioning of material clamps maximizes the utilization of the material.
Side address clamps permit the processing of irregular shaped drops.
Handles plates up to 4″in thickness.

Model Tipo B

112 ton of punching power.
Up to 4 different punch tools available.
4″ diameter maximum hole size.
High performance spindles with a ball screw feed and fixed spindle design to fully utilize carbide tools for drilling rates up to 60 inches per minute.
Spindle speeds up to 4,000 RPM is provided with a 27 HP drive.
Oxy-fuel and plasma cutting systems.
Guaranteed accuracy with rack and pinion positioning and measuring systems on stock material regardless of the edge condition of the stock plate.
The datum line carriage system eliminates the potential of horizontal clamps collapsing the skeleton.
Irregular stock plates or drops can be returned to stock and later utilized without having to make a square cut to start the CNC process.
The datum carriage system permits virtually the entire stock length to be used to minimize scrap.
Guaranteed accuracy regardless of rust and mill scale.
Guaranteed accuracy on large and small parts
Maximum accuracy is assured regardless of where they are nested in the stock plate

Drill Spindles

The Ficep drill spindle design features a ball screw feed that is consistent with today’s machining center designs.
This design permits the tool to advance through the material at a uniformfeed feed rate that is coordinated and maintained by the CNC control.
Eliminates the tendency for the drill bit to rapidly accelerate and actually punch through the material upon breakthrough.
This is the same system that is used in all CNC machining centers today to achieve maximum metal removal and to be able to fully utilize today’s high performance insert tooling to its maximum efficiency.
The spindle speed range of the Ficep drilling spindle is also designed to accommodate the RPM (up to 4,000 RPM) requirement of today’s high performance insert tools.
The entire drill head and spindle are advanced to the material as a single unit rather than just extending the spindle while the gearbox remains stationary to eliminate vibration.
Internal and external coolant selected by program command.
Full spindle speed range available for all tools; maximum hole size of up to 4″.
Punching is always located directly in the middle of the hydraulic punching ram to eliminate any side loading positions.

CNC Control

Quick operator familiarity due to the utilization of a standard PC platform
The Ficep eliminates the requirement for additional hardware such as third party axis control boards, PLC hardware and encoder switching boards
The Ficep Windows-based Control is provided with the proprietary Ficep for remote diagnostics through an internet connection.

Part Marking

38 position fully programmable turret marking system
Fully programmable scribing system for part marking and the generation of scribing lines.

Specifications
Model	Plate Size	Positioning System	Punches	Drills
Tipo B 164	60″ x 20 ft.	Side datum clamps	Yes	Optional
Tipo B 254	98″ x 20 ft.	Side datum clamps	Yes	Optional

Options
Model	Plasma	Oxy/Fuel	Drill Thickness	Punch Thickness	Spindle
Tipo B 164	Standard	Optional	4″	1″	27 HP
Tipo B 254	Standard	Optional	4″	1″	27 HP