• Ganesh Machinery GT-2680 – Year 2022

    Contact us for price

    Category:

    Description

    Ganesh Machinery GT-2680 – Year 2022
    Condition : New

    26” x 80″ Geared Head Engine Lathe
    Beautiful, new condition. Made in Taiwan. Meehanite Castings, fine grain and high-density cast iron using the superior Meehanite process yields superior vibration dampening and improved surface finish and tool life, as well as greater wear resistance on the ground way surfaces.

    Includes 1 year parts warranty!
    Available to view under power on show room floor by appointment through Machinery Dealer Company.

    Optional accessories available.

    FEATURES

    • 33-1/4” Swing in 6.5” Wide Gap
    • 15-HP Spindle Motor
    • Spindle Speeds from 15 – 1200 RPM
    • 12-Spindle Speed Gear-Ranges for High-Torque
    • D1-11 Camlock Spindle
    • 4-1/8” Spindle Bore
    • Longitudinal Rapid Traverse Positioning
    • Efficient 2-Speed Quill Advance

    INCLUDES                                           

    • 12” 3-jaw Chuck
    • 16” 4-jaw Chuck, 6.3″ Bore
    • Steady Rest
    • Follow Rest
    • Full Length Splash Guard
    • Foot brake
    • 4-Way Tool Post w/wrench
    • Chuck Guard
    • Machine Leveling Pads
    • Halogen Work Light
    • Optional accessories available.
      • Contact us to get the best price quote.

    SPECIFICATIONS                                     

    CAPACITY
    		  
    Swing Over Bed
    		 26″
    Center Height
    		 13″
    Swing Over Cross Slide
    		 18-1/16″
    Swing Over Gap
    		 33-1/4″
    Length of Gap in Front of Face Plate, D1-6
    		 6-1/2″
    Distance Between Centers
    		 80″
    SPINDLE
    		  
    Spindle Motor
    		 15-HP
    Spindle Speeds, 12
    		 Low 15 to 375
    High 85 to 1200
    Spindle Bore
    		 4-1/8″
    Spindle Nose
    		 D1-11
    Spindle Taper
    		 MT-8
    CARRIAGE
    		    
    Cross Slide Travel
    		 14.96″
    		 380mm
    Cross Slide Width
    		 7-3/32″
    		 180mm
    Cross Slide Lead Screw Pitch
    		 4 TPI
    		  
    Cross Slide Resolution Per Division
    		 0.200″/rev
    		  
    Carriage Lead Screw Diameter
    		 1-1/2″
    		 38mm
    COMPOUND
    		    
    Top Slide Travel
    		 10″
    		 255mm
    Top Slide Width
    		 4-11/32″
    		 110mm
    TAILSTOCK
    		    
    Quill Diameter
    		 2-15/16″
    		 75mm
    Quill Stroke
    		 6-5/16″
    		 160mm
    Quill Taper
    		 MT-5
    		  
    THREAD CUTTING
    		    
    Thread Cutting Range, 60 inch pitches
    		 2 – 112 tpi
    		  
    Thread Cutting Range, 60 metric pitches
    		 0.2 – 14mm
    		  
    FEEDS
    		    
    Longitudinal, 50 feeds
    		 0.0014” –   0.0387”/rev.
    		  
    Cross, 50 feeds
    		 0.0007” –   0.01935”/rev.
    		  
    WEIGHT & DIMENSIONS
    		    
    Machine Dimensions
    		 140” x 51”
    		  
    Machine Height
    		 54″
    		  
    Machine Weight
    		 6,283 lbs.
    		  
    Power Requirements
    		 220 Volt, 3-Phase
    		 40 amps

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products