Description
Geka Gamma Traction GT-250 CNC Structural Steel Punch Shear Drill Line – Year 2024
SPECIFICATIONS:
Min Angle Processing: 2″ x 2″ x 3/16″
Max Angle Processing: 10″ x 10″ x 1″
Max Flats Processing: 10″ x 1″
C-Channel Processing: 6″
Material Infeed: Via Gripper
Number of Punches Per Leg: 3 x 2
Max Punching: 1-1/4″
Punching Power Tons: 88 Tons
Shear Power Tons: 492 Tons
Measure Marking: 5 Holders, 10 Characters Each
Wheel Marking: 40 Characters Each
Drilling Station: 1 per Leg w/4 Tools
Software in Windows 10: Std. LinePro Net/ Optional LANTEK
Equipped With:
Punching Unit – 6x Punches. CNC-controlled backmark. Hydraulic hold down.
Input Converyor Unit – Material held and pushed with clamp. Rack & pinion system servo motor driven.
Double Drilling Unit – 8 tools (4 per leg). Maximum diameter 1-9/16″.
Shearing Unit – Clean cuts without waste.
Easy and quick access to blades.
Full CNC Control – Windows 10 based PC control. Standard remote assistance.
Marking Unit – CNC controlled positioning and marking selection with adjustable pressure valid for galvanizing.
Full Catalog Available Upon Request
Many Other Sizes Available Upon Request
FOB from the warehouse, Install Included
1-Year Warranty
Manufacturer Catalogue Information about Geka Gamma Traction GT-250:
Gamma Traction 250 Capacities
The capacities of this machine can are shown in the following table:
| FEATURES | GAMMA TRACTION 250 |
|---|---|
| Minimum angle | 40X40x4 mm |
| Maximum angle | 250X250x25 mm |
| Marking | Cassette |
| Characters | 14x10x19 mm |
| Number of punches | 6 (3 / wing) |
| Max. punching diameter | 31 mm |
| Max. punching diameter through thickness | 31X16 mm |
| Punching force | 730 kN |
| Drilling tools | 8 (4 per wing) |
| Max. drilling diameter | 40 mm |
| Tool Holder | SK40 |
| Shearing force | 5.500 kN |
-
- Capacities based on a material resistance of 45 Kg/mm2.
- GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
- Technical characteristics valid except for typographical errors or omissions.
Gamma Traction 250 is a punching machine that is part of Geka´s angle processing range. It can punch thicknesses of up to 16 mm. It can also drill with four tools per wing up to 40mm in diameter. Its shearing station allows shearing profiles up to 250x250x25 mm. Besides, it does clean cuts and it is easily accessible.
The punching unit has 6 punches, 3 per wing. Its CNC controlled gauge and its hydraulic hold down allow a punching force of 730 kN.
The cassette marking unit allows programmable positioning that can get up to 10 characters and 5 different references. The Gamma Traction 250 programmable automatic unloading system allows to identify and distribute production automatically.
This CNC angle processing line also features a user-interface with integrated Windows 10 that can be remotely controlled through internet.
