Description
Gildemeister NEF Plus 500 – Year 1993
| Turning length | 1500 mm |
| Ø above the bed | 500 mm |
| Ø above transversing slide | 290 mm |
| CNC Lathe | |
| Spindle taper | Bizon Bial fi 250 |
| Spindle bore | 70 mm |
| Turning speed | 2800 rpm |
| Spindle motor power | 11 kW |
| Tailstock | no |
| Bar feeder | no |
| Gildemeister NEF Plus 500 | |
| Weight | 3000 kg |
| Worked hours | 32000 hours |
Technical data of the GILDEMEISTER NEF Plus 500 lathe
– maximum turning length: 1500 mm
– maximum turning diameter over the bed: 500 mm
– maximum turning diameter over the slide: 290 mm
– spindle speed range: 80-2800 rpm
– spindle tip: Bizon Bial fi 250
– spindle passage diameter: 70 mm
– spindle power: 11 kW
– maximum speed of the interceptor spindle: 5000 rpm
– interceptor spindle power: 7.5 kW
– working time: 32,000 h
– total power requirement: 24 kW
– power supply: 400 V 50 Hz
– total weight: approx. 3 t
Equipment of the NEF Plus 500 CNC lathe
– CNC control: Grundig Manual Plus
– tool post: Multifix C
– four-jaw handle Ø 160
– steady rest
– a set of tools
– Tool locker
GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1993 in Germany. The machine is used for precise machining of details made of metal with a maximum length of 1500 mm and a diameter of 500 mm (over the bed) or 290 mm (over the support). On the lathe body is a Grundig Manual Plus CNC with a color screen and control panel, allowing cycle control and full control over every aspect of machining.
The CNC lathe is offered with extensive equipment, which includes, among others Multifix C tool post, 7.5 kW counter spindle operating at a maximum speed of 5000 rpm and a set of tools. The lathe was used for one shift, during which it worked a total of 32,000 hours. The total weight of the machine is approximately 3 tons.
