Description
GLEASON 13 Universal Angular Bevel Testing Machine
Condition:used
Maximum diameter gear (nominal):13″ (330.2MM)
Range of angles:0 TO 180 DEGREES
Range of offset pinion spindle:BELOW CENTER 2″ (50.8MM)
Max. center distance, (spurs, helicals and herringbones):8″ (203.2MM)
Drive spindle bore (large end):3-29/32″ (99.2MM)
Drive spindle bore, (taper per ft):39/64” (15.478MM)
Brake spindle bore, (large end):2-19/64″ (58.34MM)
Brake spindle bore, (taper per ft):1/2″ (12.7MM)
Floor space:60.5″ X 80.5″ (1537X2045MM)
Approx. machine net weight:5,200 LBS. (2364 KGS)
SUITABLE FOR THE RUNNING TESTING/CHECKING FOR SMOOTHNESS AND
QUIETNESS OF OPERATION AND INSPECTION OF ACTUAL TOOTH CONTACT,
UNDER LOAD, (TOOTH BEARING) ON A WIDE VARIETY OF STRAIGHT AND
CURVED TOOTH BEVEL GEARS OF ANY SHAFT ANGLE, INCLUDING HYPOID,
SPUR, HELICAL, INTERNAL GEARS, AS WELL AS WORM AND WORM-WHEEL
COMBINATIONS UP TO 13” MAXIMUM DIAMETER.
EQUIPMENT / FEATURES:
4 SPEED MAIN DRIVE MOTOR W/DRUM SWITCH SPEED SELECTOR
3 HP, 3PHASE, 60 CYCLES, 220 VOLTS
2-STEP DRIVE PULLEY
FORWARD/REVERSE DIRECTION SPINDLE ROTATION
VIA PUSH BUTTON
MANUAL SPINDLE BRAKING
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
HAND-WHEELS, GUARDS, COVERS
