Description

Gleason Phoenix 250HC CNC Hypoid Cutting Machine.

• Control: CUPROC Series 2000 CNC
  Capacities –
  Face Milling:
• Extreme Ratio 10:1
• Full Depth (Max) 1.00″ (25.4mm)
• Face Width (Max) 2.60″ (66mm)
• Range of Tooth Numbers 5 to 200 Inclusive
• Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter -12″ Diameter Cutter
  At The Following Ratios:
• 1:1 13.50″ (342.90mm)
• 2:1 16.00″ (406.40mm)
• 3:1 16.00″ (406.40mm)Face Hobbing:
• Extreme Ratio 10:1
• Full Depth (Max) 0.60″ (15.24mm)
• Face Width (Max) 2.00″ (50.8mm)
• Range of Tooth Numbers 5 to 200 Inclusive
• Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter 350mm Diameter Cutter
  At The Following Ratios:
• 1:1 10.56″ (268.22mm)
• 2:1 10.83″ (275.00mm)
• 3:1 10.83″ (275.00mm)Cutter Diameters:
  Face Milling:
• Conventional Face Sharpened & RSR-C 2.75″ – 12″
• HELIXACT & VERSACUT II 100mm – 320mm
  Face Hobbing:
• TRI-AC 102mm – 210mmMachine Specs:
• X-Horizontal Travel -4.50 to +7.00″ (-114mm to +178mm)
• Y-Vertical Travel -7.00″ to +7.50″ (-178mm to +190mm)
• Z-Sliding Base Travel -5.20″ to +19.70″ (-131mm to +500mm)
• B-Root Angle -3° to 90°
• Machine center to Work Spindle Face 6.50″ (165mm)AXES SPEEDS
• X-Horizontal 0 to 3.15″/Sec (0 to 80mm/Sec)
• Y-Vertical 0 to 3.15″/Sec (0 to 80mm/Sec)
• Z-Sliding Base 0 to 3.15″/Sec (0 to 80mm/Sec)
• A-WorkSpindle 0 to 83 RPM 90 to 33 RPM metric)
• B-Swinging Base 0 to 30 Deg/Sec
• C-Cutter 0 to 400 RPMWork Spindle Dimensions:
• Diameter of Taper Hole – Large End 5-3/64″(50 Taper)
• Taper Per Foot 21/32″
• Depth of Taper 5.29″ (134.37mm)
• Diameter of Hole Through Spindle 3.35″ (85.22mm)