• GOODWAY TS-150M – Year 2008

    Contact us for price

    Category:

    Description

    GOODWAY TS-150M – Year 2008
    CNC Lathe

    Technical specifications of the GOODWAY TS-150M lathe
    maximum turning diameter: 220 mm
    maximum turning length: 305 mm
    feed rates in the X/Z axis: 305/320 mm
    rapid traverse in the X,Z axis: 24 m/min
    maximum spindle speed: 6000 rpm
    minimum spindle speed: 45 rpm
    maximum spindle passage: 55 mm
    passage over support guard: 330 mm
    passage over cross slide: 60 mm
    maximum passage over extension sleeve: 45 mm
    internal diameter of front bearing: 80 mm
    height of tusk above floor: 1040 mm
    number of tool slots: 4
    number of toolholders: 8
    tool dimensions (square): 20 x 20 mm
    tool dimensions (round): ø 25 mm
    chuck diameter: 165 mm
    thrust force in X,Z axes: 190 kgf
    ball screw diameter in X,Z axis: 28 mm
    stroke of ball screws in X,Z axes: 8 mm
    hydraulic system tank capacity: 40 l
    cooling tank capacity: 150 l
    cooling system pump motor power: 0.2 kW
    hydraulic pump motor power: 0.75 kW
    noise level: 80 dB(A)
    power supply: 3x 220 V; 50/60 Hz
    dimensions (L x W x H): 1705 x 1350 x 1700 mm
    weight of the TS-150M machine: 1750 kg
    Equipment of the lathe

    CNC controller: FANUC Series 0i-TC
    transformer: YOEN MB-CE
    measuring probe
    X,Z axis AC servo motors 0,9 kW
    turret head
    lubrication system pump motor: SHOWA MV30103B 220 V
    spindle tip: A2-5
    hardened induction slide guides
    chip container
    knives
    toolholders
    cutters
    toolbox
    workspace lighting
    automatic lubrication
    safety interlock for gripping failure
    pressure switch for power failure
    full technical documentation

    GOODWAY TS-150M CNC lathe was manufactured in 2008 in Taiwan. The machine’s small dimensions and compact, stable design allow it to achieve high precision turning of workpieces made of aluminium, iron, cast iron, copper and stainless steel, even during the most intensive work. Workpieces with a maximum diameter of 220 mm and a length of 305 mm are machined in manual or automatic mode by using the installed FANUC Series 0i-TC CNC control.

    The CNC lathe has a fully illuminated workspace, inside of which there is, for example, a 165 mm diameter chuck with automatic hydraulic clamp, hardened induction slide guides and an extremely precise spindle rotating at a maximum speed of 6000 rpm. Equipment of the machine includes among others tool holders and a YOEN MB-CE transformer. The GOODWAY TS 150M turning centre weighs 1750 kg.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products