HARTFORD HCMC-1892 – 2013 Model

Contact us for price

Category:

Description

HARTFORD HCMC-1892 – 2013 Model
CNC Vertical Machining Center

Condition:used
– dimensions of the working table:2000 x 920 mm
– maximum table load:3 tons
– x / y / z axes:1800/920/700 mm
– weight with the holder:15 kg – for the BT-50 cone
– maximum tool diameter:125 mm
– maximum tool length:300 mm
– maximum spindle speed:8000 rpm
– cutting speed:1 – 7000 mm / min
– main engine power:15 kW
– xyz axis drive motors power:7 kW
– vertical spindle with a cone seat:BT-50 / CAT – 50 (at higher speeds BT-40)
– weight:17 t
– screw chip conveyor:2 pieces

HARTFORD HCMC-1892  Machine was built in 2013 by the Taiwanese company Hartford Machinery. The machine works in three axes (X, Y, Z) with maximum axis travels of 1800 mm, 920 mm and 700 mm, respectively.
The milling machine is controlled by the controller.
The working table of the machine has a surface area (L x W) of 2000 x 920 mm and enables the processing of a workpiece with a maximum weight of 3000 kg.

The HCMC 1892 CNC milling center is equipped with a spindle that rotates at a maximum possible speed of 8000 rpm.
The distance of the spindle face to the table is 1020 mm. In addition, the HMCM-1892 machining center is equipped, among others, with an automatic lubrication system, a screw chip conveyor and hardened slide guides secured with telescopic protective covers.

The machine is fully operational, it has been regularly serviced
– the spindle (2021), the Z axis ruler (2017) and the Z axis propeller bearings (2017) have been replaced.
– blowing the spindle with compressed air

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products