Description
HOMAG BMG311 VENTURE316M CNC Wood 5-Axis Machining Center – Year 2014
X stroke 3300 mm
Y stroke 1550 mm
Tool changer positions 14
CNC type WoodWOP 6.1
5-axis spindle 10 kW
Max. machining area 3300 x 1550 mm
Control system WoodWOP 6.1
LED setup assistance
14-position tool magazine
Drill head with 16 spindles (12 vertical + 6 horizontal)
9-position linear tool changer
Chip conveyor
CNC-controlled 5-axis machining center in gantry design, for milling and drilling workpieces made of wood or wood-like materials.
Workpiece Parameters:
Max workpiece length for Venture 316M:
All units:
Single: 3300 mm
Pendulum mode:
Max: 1740 mm
Min: 300 mm
Tool diameter 25 mm:
Single: 3475 mm
Pendulum mode:
Max: 1915 mm
Min: 300 mm
Max workpiece width:
Stops: Front, back
All units:
Front: 950 mm
Back: 1400 mm*
Milling operation with tool diameter 25 mm:
Front: 1050 mm
Back: 1550 mm**
With a horizontally tilted spindle, a tool length of 150 mm can be used at the back (including HSK), e.g., for door hinge machining. For front machining, a tool length of 230 mm is possible.
Limitations in drilling operation: See bolt layout plan.
Workpiece thickness:
Max: 250 mm, including clamping elements (can be processed with a tool length of 230 mm, including tool holder).
Up to max. 60 mm with standard clamps, without restrictions for units and extraction.
Machine Equipment:
Clamping table:
Console table: K
Consoles with front stops: 6 pieces
Fixed rear stops: 4 pieces
Lift rails: 4 pieces
Console length: 1340 mm
Side stops:
Left (Position 1): 2 pieces
Right (Position 2): —
Right (mirror position): 2 pieces
PowerControl PC85
WoodWop package for AV-PC
LED positioning display system
5-axis main spindle 10 kW Drive5C:
Cardanic 5-axis head for milling, drilling, and sawing at any angle
Drive5C unit interface:
For using machining units
14-position disk changer (bottom):
For tools and units with HSK63
Drill head with 16 spindles:
V12/H4/S0/90°:
1 motor 2.2 kW, frequency-controlled
Max speed 7500 rpm, selectable via program for fast processing, even with small diameters.
12 vertical high-speed spindles:
Each spindle with quick-change system to reduce setup time
Spindle arrangement in L-shape
6 spindles: X-direction
7 spindles: Y-direction
4 horizontal spindles with saw, 0/90°:
Spindles can be swiveled 0/90°
Extension stroke: 113.5 mm in the Z-direction
One reinforced drilling spindle with a holder for a grooving saw for grooving in the X- and Y-directions.
Spindles arranged crosswise:
2 spindles: X-direction (+X/-X)
2 spindles: Y-direction (+Y/-Y)
9-position linear tool changer for BMG311 (without Flex5 (+)):
9 tool change positions
