Description
Honor VL-400CM – Year 2018
Vertical CNC Lathe
| Working height | 2000 mm |
| CNC type | Siemens |
| Max piece weight | 40000 kg |
| Overhauled | no |
| Honor VL-400CM | Vertical CNC Lathe |
| Worked hours | 4000 hours |
Honor VL-400CM Vertical CNC Lathe
Machine is in excellent condition
Table diameter : 4000 mm
Max swing diameter : 4500 mm
Maximum turning diameter : 4500 mm
Maximum cutting height : 2000 mm
Maximum weight of workpiece : 40000 KG
Distance from table to ram : 880-2320 mm
Manufacturer Catalogue Information about
Honor VL-400CM CNC Large Vertical Lathe :
| Spec./Model | unit | VL-300C | VL-300CM | VL-400C | VL-400CM | VL-500C | VL-500CM | VL-600C | VL-600CM |
| Max. swing dia. : | mm | 3,600(141.7″) | 4,500(177.1″) | 6,000(236.2″) | 7,000(275.5″) | ||||
|---|---|---|---|---|---|---|---|---|---|
| Max. turning dia. : | mm | 3,600(141.7″) | 4,500(177.1″) | 6,000(236.2″) | 7,000(275.5″) | ||||
| Max. turning height : | mm | 2,000(78.7″) | 2,000(78.7″) | 2,600(102.3″) | 2,600(102.3″) | ||||
| Live spindle speed : | rpm | – | 50-2,250 | – | 50-2,250 | – | 50-2,250 | – | 50-2,250 |
| Number of tool position : | pcs | 16 | 20 | 16 | 20 | 16 | 24 | 16 | 24 |
| Max. workpiece weight : | kgs | 30,000 | 40,000 | 80,000 | 100,000 | ||||
Standard accessories
- Complete splash guard.
- Hydraulic power unit.
- Table with manual 8-jaw chuck.
- Protection door.
- Automatic lubriccation system.
- Working light.
- Warning light(R/Y/G).
- Workpiece counter (CNC controller).
- Coolant system with tank.
- Coolant bed wash down system.
- Heat exchanger for electrical cabinet.
- Hand tool sets with toolbox.
- Leveling bolts & seat pads.
- Chip conveyor (Hinge type).
- Chip trolley.
- Spindle orientation.
- Manual of operation & maintenance.
- Manual of electrical & hydraulic circuit diagram.
Optional accessories
- Hydraulic chuck & cylinder, size selections.
- Higher power motor.
- Air conditioner for electrical cabinet (Standard for CM series)
- Power transformer (external).
- Oil skimmer (Disk type).
- Tool holder base.
- Other tool holder & special tool holder.
- Tool presetter.
- Workpiece probe
- Linear encoder of X/Z axis.
- High & low pressure chucking.
- Lubricant chiller for spindle bearing &gear
- Extend vertical travel (Z axis).
- Hard jaw for hydraulic chuck.
- High-pressure coolant through tool holder.
- Dual speed gearbox for tool lice spindle.
- Chip conveyor (scraper type).
- Manual guide I.
- CE certificate.
- Tooling
- Jig & fixture.
- Turnkey project.
- Siemens controller.
