Hwacheon Hi-Tech 350A YSCM – Year 2015

Contact us for price

Category:

Description

Hwacheon Hi-Tech 350A YSCM – Year 2015
CNC Turning Center Sub Spindle Y Axis

NC Controller Fanuc 0i-TF
Swing over bed 27.56 in
Swing Over Saddle 21.65 in
Max. cutting diameter 16.54 in
Standard Cutting Diameter 10 in
Chuck-Size 8 in [Sub: 8 in]
Type of Spindle Nose ASA A26 [Sub:A2-6]
Max. Spindle Speed 5,000 rpm [Sub: 4,000]
Through Spindle Hole Diameter ø2.95 in [ø2.44 in]
Max. Bar size ø2.56 in [ø2.01 in]
Spindle Motor (30min/cont) 25/20 [10/7.5] HP
Turret: Number of tool station 12 ea.
Axis: Rapid Speed (X/ Z / Y / B) 787 / 945 / 394 / 630 ipm
Axis: Max. Stroke (X / Z / Y / B) 280 (YSCM: 260) / 790 / 120 / 726 in
Axis: Feed Motor (X / Z / Y / B) 5.5 / 5.5 / 5.5 / 2.2 HP
Tailstock Travel 25.59 in
Tailstock: Quill Diameter ø3.94 in
Tailstock: Taper Hole # 5 MT
Tailstock: Quill Stroke 4.72 in
Turn mill: Rotary tool Spindle Motor 2.2 HP
Turn mill: Max. Rotary tool Speed 5,000 rpm
Spindle power 20 HP
Spindle speed 5000 rpm
Spindle torque 164.9 / 133.8 Nm
Rapid speed 20 / 10 / 24 m/min
Tool shank BMT-65 / BH
Max. cutting length 26.5 in
Sub spindle speed 4000 rpm
Sub spindle motor power 10 HP
Spindle center Height: 45.67 in
Coolant Tank Capacity 50.19 gal.
Power Source: Electrical Power Supply YMC: 50, YSMC: 55
Conveyor Dimensions (LxWxH) 162 in x 19 in x 80 in
Machine Dimensions (LxWxH) 138 in x 81 in x 87 in
Machine weight (14,110 lbs.)
Sub Spindle, Y Axis, Tool Pre-setter, 1000 PSI High Pressure Coolant, Probing, 2.5″ Bar Capacity, 8″ Chuck, Chip Conveyor, Run Time: 1414

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products