Description
| X Axis | 1016 mm |
|---|---|
| Y Axis | 406 mm |
| Z Axis | 406 mm |
| Table length | 1466 mm |
| Table width | 267 mm |
| Max load on table | 454 kg |
| Spindle taper | BT 40 |
| Max. spindle speed | 6000 rpm |
| Spindle motor power | 5.6 kW |
| Overhauled | no |
| Weight | 2359 kg |
| Worked hours | |
| Hours under power | 11000 hours |
| State | good |
Ranges of movement:
– X axis: 1016 mm
– Y axis: 406 mm
– Z axis: 406 mm
– from end of spindle to table (maximum): 508 mm
– end of spindle to table to table (minimum): 102 mm
Spindle:
– maximum power: 7.5 hp, 5.6 kW
– maximum speed: 6000 rpm
– maximum torque: 1200 rpm
– drive type: Direct Speed, Belt Drive, Direct Speed, Belt Drive
– cone: CT or BT 40
– bearing lubrication: Grease Packed
– cooling: Air Cooled
Table:
– length: 1466 mm
– width: 267 mm
– T-slot width: 16 mm
– distance from the center of the T-slots: 102 mm
– number of standard tables with T-slots: 3
– maximum table load (evenly distributed): 454 kg
Feeder:
– maximum cutting: 10.2 m / min.
– run-on speed on X: 10.2 m / min.
– run-on speed on Y: 10.2 m / min.
– run-on speed on Z: 10.2 m / min.
Axle motors:
– maximum thrust X: 8896 N
– maximum thrust Y: 8896 N
– maximum thrust Z: 8896 N
Tool magazine:
– type: Carousel
– capacity: 10
– maximum tool diameter (full neighboring socket): 89 mm
– maximum weight tools: 5.4 kg
– tool change time: 5.7 s
– chip change time: 6.5 s
Dimensions of the transport box:
– national pallet: 331 cm x 199 cm x 249 cm
– export pallet: 331 cm x 199 cm x 249 cm
– weight of the HAAS TM-2P machine : 2359 kg
