Description
| Turning length | 3200 mm |
|---|---|
| Turning Ø | 51 mm |
| X-axis | 410 mm |
| Z-axis | 201 mm |
| Number of turrets | 12 |
| Tailstock | no |
| Bar feeder | no |
| Worked hours | 700 hours |
HYUNDAI E200MA CNC automatic lathe was built in 2014.
The turning center is offered with the BARLOAD BFG 542 feeder.
The machine has worked for about 700 hours.
The machine is offered with full equipment.
Standard equipment:
12 position tool head VDI30 (12 driven positions)
C axis, with 0.001 degree resolution
three-jaw hydraulic handle: fi 165 mm
additional sleeve holder for the feeder
a set of fixed tool holders
radial and axial rotary holders
foot switch the jaws
features the additional turning center HYUNDAI E200 MA :
interface bar feeder
Manual Guide I (Power programming)
automatic receiver parts
the chip conveyor bucket
retractable tailstock quill
sensor tool
a transformer
high coolant pressure (6 bar)
Automatic barfeeder BARLOAD BFG 542 :
– maximum length of the bar to be fed: 3200 mm
– maximum diameter of the bar to be fed: fi 51 mm, with 52 mm channel
– minimum diameter of the bar to be fed: fi 5 mm
– set of sleeves
– bar guide channel diameter: 33 mm, for a bar with a maximum diameter of 32 mm
– additional guide channel
– hydraulic unit
