Description

Machining center PICCHI TRANSFER TR 10 – 15 / OS

The PICCHI multi-spindle automatic machining center is designed for serial production of parts made of semi-finished products fastened in successive machine clamps. The machine has 15 heads, including 6 on the right, 4 on the left and 5 on the table rotation axis, of which 12 drilling and milling heads and 3 thread heads. The work table is equipped with 10 holders, in which the semi-finished products are sequentially fastened and by turning the table (turning vertically down) further machining operations are performed (milling, threading, drilling). It is possible to perform 15 operations on 9 elements at the same time. Automatic machine is used for machining of forgings and brass blocks, it was used for the production of, among others, safety valve bodies, water meters, multivalves, bodies of solenoid valves, pneumatic components and power hydraulics.

GENERAL INFORMATION:
Production year: 1998
Dimensions [mm]: Machine 3800 x 4300
Control cabinet with refrigeration unit 3500 x 900
The whole area is 5700 x 5000
Total power: 85 kW
Weight: 9.2 t
Supply voltage: 400 V
Frequency: 50 Hz

LARGE FORMED ROTARY TABLE:
Rotation axis: horizontal
The maximum dimension of the detail: 525 mm
Number of fixings: 10
Locking system: Hirth Ø 450 gears
Torque reducer: Cyclo FC-A45G-89
Engine: brushless with nominal torque of 18 Nm, type Simens IFT5076 3000 rpm
Reducer connection: direct
Direction of rotation: down

VICE:
Opening vise stroke: 0-26 mm
Maximum force of locking vice (4 MPa): 1176 daN

DRILL UNIT – MILLING MACHINE (12 pieces)
Spindle diameter: 100 mm (ISO 40 fastening)
Maximum speed in the Z axis: 12 m / min
Spindle speed range 1000-2000 rpm 1440-2880 rpm

CONTROL CABINET: SINUMERIK software

ADDITIONAL EQUIPMENT (included in the price of the machine):
Hydraulic aggregate: Berarma type 02PSP3-80
Lubricating unit: Viovoil type KVOP / 0.98
Pump: SACEMI 3.6 kW type AP 30B / 200
Chip conveyor