Description
Jones & Shipman 1300X – Year 1998
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
14″ x 27″ JONES & SHIPMAN “HIGH PRECISION”
MICROPROCESSOR CONTROLLED
(MADE IN GREAT BRITIAN, NOW A DIVISION OF HARDINGE)
MODEL: 1300X S/N: M20307 MFG. 1998
Table:
Swing:…………………………. 14″
Distance Between Centers:………… 27″
Table Swivel:…………………… 16 Degrees CW
18 Deg. CCW
Feed Rate:……………………… Up to 196.8″
Minimum Programmable Increment …… 0.00005″
HPG Increments …….. 0.00005″, 0.0005″, or 0.005″
Wheelhead:
Total Infeed Travel:…………….. 9.6″
Max. Programmable Diametral
Infeed Rate, per Minute ………… 3.9″
Minimum Programmable Increment …… 0.00005″
HPG Increments …….. 0.00005″, 0.0005″, or 0.005″
Swivel Range …………………… 190 Degrees CW
45 Deg. CCW
External Grinding Wheels:
Grinding Wheel Size, L.H. Standard:.. 14″ x 2″W x 5″B
R.H Standard: .. 12″ x 1″W x 5″B
Spindle Speeds (3):………. 1775, 2068 & 2400 RPM
Motor Power: …………………… 5.5 H.P.
Headstock:
Swivel:………………………… 15 Degrees CW
90 Deg. CCW
Speed, Infinitely Variable:………. 30 to 450 RPM
Centers, Standard/Reduced ……….. #5 MT/#3 MT
Approximate Weight: …………….. 5,300 Lbs.
Approximate Dimensions: ………. .. 99″L x 55″D x 71″H
Equipped with:
“Microprocessor Control is from a unique, operator
compatible, touch key panel, that’s easy to use and,
because of faster set ups, enables a higher level of
grinding performance.”
“Grinding cycles are very easy to program, using step
by step parameter prompting with default values
which can be accepted or amended as required.
At the end of a cycle the wheel retracts automatically.
For manual operation, precise control of table traverse
and wheelfeed is by hand pulse generators (HPG’s) and
the position of each axis is clearly indicated on digital
readouts, which also display parameters.”
Automatic Dressing of the grinding wheel with automatic
wheel compensation.
Table and wheelhead driven by AC digital servo motors,
preloaded ballscrews& rotary encoders.
Low friction coated guideways on the table and wheelhead
axes.
AC variable speed headstock motor with #5 MT/#3 MT center
adapter.
Adjustable spring loaded tailstock with #3 Morse Taper center
“Darenth” external coolant pump and tank with paper band
filtration.
Three Wheelhead Design, L.H. Standard, R.H. Standard
and Swing Around Internal Grinding, complete
with internal grinding spindle.
Machine Operation and Maintenance manual
Machine is wired for 230 volt operation.
Inspect Under Power in our Warehouse
Excellent Machine, Condition & Appearance – Original
