• KERN MIKROTECHNIK KERN EVO – Year 2008

    Contact us for price

    Categories: ,

    Description

    KERN MIKROTECHNIK KERN EVO – Year 2008
    used machine

    Year of manufacture: 2008, Machine No.: 670
    – Working range X 300, Y 280, Z 250 mm – Feed speed 0.01 – 16,000 mm/min – Acceleration 8 m/s2
    Resolution: 0.1 μm Position spread Ps: ±0.5 μm
    CNC precision dividing head (4th and 5th axis)
    – System 3R Macro Chuck – Brushless servo drive, fully digital – Feed speed C/B 7000 / 3000 °/min
    – Swivel range B from -10 to +120 degrees
    – Heidenhain iTNC 530 smarT.NC
    – High frequency coil HSK E25 500 -50’000 rpm
    – Tool changer 95-fold
    – Prepared for external workpiece changer
    – Minimum quantity lubrication
    -Suction
    – CO2 extinguishing system
    – Laser for tool measurement (Blum)
    – Infrared 3D probe
    – External dry cooler
    – External spindle cooling unit
    – External coolant device with cooling
    – Vorma machine light

    Accessories

    – Shrink device Haimer Power Clamp Nano
    – HSK E25 mounts (CORE) ø 2 – 6mm
    (Total 115 pcs; Shrinkage: Haimer, collets: Schäublin; Schunk Tribos)
    – μy length compensation spindle
    – Replacement probe (factory overhauled)
    – Replacement laser measuring device (factory revised)
    – Replacement spindle (factory overhauled)
    – Centering microscope
    – Postprocessor for FeatureCam
    – Schunk Tribos Accessories
    – Calibration agent (mandrel, alignment mandrel spindle + TA, + calibration ball TA)
    – 20 System R macro plates
    Operating hours as of 8.8.2023
    Control on: 34823h
    Engine on: L3560815 14724h
    Program run: 3747h
    Spindle: approx. 700h (New spindle as of 2022, value has not been reset on control)
    New dividing head as of 2021

    Known Deficiencies
    – Crack in pane
    – peeling off the paint in the interior

    The machine has been very well maintained and has only been used for micro-machining of prototypes.
    It is in perfect condition and can be visited under power.
    The system is complete and ready for use. Plug in and get started.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products