Description

Showroom model – total run time : < 10 hours – ready for pickup

This open combination of tube laser and plate laser for metals has a standard working area for plates of 300 × 150 cm. and can also automatically laser cut pipes, tubes and profiles up to lengths of 3 meters (optional 6 meters). Buying a tube laser is a great investment.

The dual-use fiber laser machine “Nora” can laser cut sheet material as well as tubes and profiles in many sizes and variations. Flat tubes, angles, uneven profiles, tubes and sleeves can all be cut with the fiber source.

wide variety of profiles

The unique automatic centering clamp allows profiles with a diagonal or hypotenuse of at least 20 mm and at most 200 mm. be edited. The maximum axis range is 3 meters or optionally 6 meters (profiles can of course be longer)

automatic height & focus adjustment

The water-cooled laser head with collimator and focus lens can also be equipped with a fully automatic focus system, making settings up to 10x faster and much more precise. Naturally, the machine is already equipped with an automatic height control as standard, so that Z-axis settings are fully automatic.

BCS100 computer controlled height controller

The BCS100 is an advanced system to automatically and dynamically control the height of the laser head above the metal sheet. The quality of the cutting score stands or falls with good height control, which is why we chose the best possible combination of Cypcut and BCS100 for laser engraving. curved and curved plates are no longer a problem. The laser head follows them automatically.

With this system it is even possible to have the edges of the sheet material searched fully automatically and the software to automatically compensate for skewed plates.

Finally, the system is equipped with extensive self-checking and self-calibration, so that the system fully adjusts and automatically adjusts itself.

computer controlled solid state laser source

Of course, the laser source is the heart of the fiber laser machine and of course we only choose the best of the best. We recommend the Raycus fiber laser sources as standard. These systems are very stable and have an MTBF of up to 80.000 hours. Optionally, we can also equip the machine with an IPG laser source for highly reflective materials. These brands are at the top of the fiber laser market. Other brands or specific models are also possible on request.

The laser source itself is completely solid-state, so no moving parts and completely maintenance-free. The powerful built-in computers fine-tune the pulse frequencies, pulse lengths and power curves.

including free remote control

This machine comes with radio remote control for quick and easy positioning in X, Y and Z direction. The remote control also gives direct access to the functions: automatic focus height search, auxiliary gases blowing, dry testing, contouring, pausing and stopping.

You will soon notice that you can work more efficiently and precisely with the remote control and never want to go without it again. The remote control is magnetic and can be hung anywhere on the machine.

including industrial cooling tower

Cooling is very important for your fiber laser, so we supply a very high-quality fully automatic cooling machine with 2 separate cooling circuits. As a result, the laser source and the laser head with the lenses are kept separately and very precisely at their own temperature.

The cooling tower is fully pre-programmed and pre-installed and is operational within 10 minutes. Just add water yourself. Naturally, the cooling tower communicates directly with the laser machine. In the event of an alarm, the chiller will immediately switch off the laser source to prevent damage to the laser.

very extensive software

Comes standard with the very powerful CYPCUT system for programming your cutting jobs. Cypcut works intuitively enough to get started right away, but has many professional functions, which you normally have to buy separately, already built-in. For example, cypcut has automatic nest functions to efficiently arrange plates, extensive lead in / out options, micro joints, fly-cutting, pierce functions and extensive cutting settings. Of course you can directly control almost all possibilities of the fiber laser from cypcut. For example, you can control the entire CNC system, regulate gas types and pressures, control the laser source remotely and possibly take over a BCS100 system.

Rotation module for 3 or 6 meters in length

The computer-controlled rotation module automatically centers each profile, while the powerful motors ensure very precise positioning in both the length direction and the axis rotation, with the maximum resolution around 0.02 mm. lies.

very robust for maximum speed

To send a large mass at high speed and high precision, a very robust base is required. This machine has a welded and perfectly aligned steel frame of no less than 4.500 Kg. to absorb the greatest G-forces and never to deform again. The double linear guide is specially designed for high precision in combination with. speeds of up to 140 meters / minute.