Description
Lissmac SMW 123 RB – Year 2022
Wet Metal Finishing and Deburring Grinding Machine
MAX. ABRASIVE BELT WIDTH: 37.4″
MAX. PART THICKNESS: 4.7″
MIN. PART THICKNESS: .012″
| Width | 37″ |
|---|---|
| Workable Thickness | 0.5 – 120 mm |
| Wet/Dry | Wet |
| Control | Siemens S7-1200 PLC |
| Note | 2 Headed Machine, Integrated Manual Filtration Unit for Coolant To Suit Standard Grinding And Deburring Purposes |
FEATURES
| Barrel Brush B-Head | Grinding R-head |
Manufacturer Catalogue Information about
LISSMAC SMW 123 RB Wet Metal Finishing and Deburring Machine
LISSMAC Grinding Machines of the SMW 1 series set benchmarks for perfect surface finish using the wet grinding process. The flexible compact model can be individually configured to meet customer requirements. LISSMAC machines are characterized by low tool costs, simple handling and also by their cost effective price-performance ratio and the resulting short amortization time.
LISSMAC SMW 123 RB
The SMW 123 RB series set benchmarks for perfect surface finish using the wet grinding process. Depending on the application, one or two heads can work individually or together. Lissmac’s great solution for wet deburring and the ability to surface finish. The machine is great for small job shops or OEM’s with limited space. The machine has a built in water filtration unit and doesn’t require a dust collector.
Description
Operating width: 37.4″
Constant pass line height (39”)
Motorized thickness adjustment .004” increments
Safety switches to stop machine
Automatic conveyor belt tracking
Large rubberized conveyor belt drive drum
Rubberized pressure rollers (oil-resistant)
Infeed table (conveyor belt), feeding area 6”
Finger safety switch on workpiece infeed
Feed jog switch for head calibration
Water spray nozzles on the heads for high-capacity rinsing and cooling
Integrated manual filtration unit for coolant to suit standard grinding and deburring purposes
Coolant tank with a tank capacity of 76.6 gallons
Integrated parts dryer with air knives and four squeeze rollers
Emergency stop buttons at the front and rear side of the machine
Spindles and electrical components all located in dry area
All electrical controls according to machine conforms to all EEC machinery safety regulations (CE)
The machine can process work piece thicknesses from 0.012” – 4.7”
Voltage: 480 volts/60 cycles, 24 V control voltage
Specifications
Aggregate 1: R-head
Grinding head for one automatic positioning contact roller (diameter: 7.8”)
Adjustable in height
Drive motor for abrasive belt with electronic wear free braking system
Direction of rotation: with feed
Photo optic abrasive belt tracking
Pneumatic tensioning of abrasive belt with integrated abrasive belt edge compensation
Conveyor Belt Feed speed: 4 – 32 ft/min
Control and terminal: Siemens S7-1200 PLC, Graphic 8.4-inch touch screen, mm/inch readout
Levelling Feet
Central Lubrication
Refractometer
R-Head Configuration:
Contact drum: 65 shore rubber contact drum
65 shore spirally grooved, rubberized contact drum
Motor and speed: STS 11 kW variable, frequency-controlled speed 6 – 60 ft/s
Speeds can be set via touch screen terminal
Aggregate 2: B-head
Barrel brush head suitable for:
Barrel brushes with a diameter of 12”
Rotation with or against feed direction
Brush oscillation with 500 strokes/min., stroke length: .120”
Manual height adjustment controlled via Touch Screen Terminal
B-Head Configuration:
3M Cut & Polish medium
Brush cassette including fleece brush (3M Cut & Polish Scotch-brite).
brush speed: 1,500 RPM
Motor and speed: Variable, frequency-controlled brush speed 500 – 1,500 RPM
Speeds can be set via Touch Screen Terminal
