Description
| X | 990.6 mm |
| Y | 787.4 mm |
| Z | 1,041.4 mm |
| Power | 22.4 kW |
| RPM | 4,000 RPM |
| # ATC | 80 |
| Pallet-W | 629.92 mm |
| Pallet-L | 629.92 mm |
| Taper | CAT 50 |
| # Axis | 5 |
| Dimensions | 243″ x 155″ x 139″ |
| Weight | 44,000 |
| Control | CNC (Mazatrol Fusion 640M) |
MAZAK HV-630 – 1999 Model
CNC Horizontal Machining Center
made in Japan
2 Pallet Changer System
5 Sided Capability with Horizontal/Vertical Head
Softare for Allowing for Angled Machining in Incremental Movements of .001 Degree
Full 4th Axis NC Rotary Table- .001 Degree
Mazak MMSB Part Probing with Probe included
Automatic Tool Length Measurement Probe
80 Tool Magazine
Chip Conveyor
Coolant Thru Spindle – 213 PSI
Rigid Tapping
EIA/ISO Input Function
Flood & Niagara Coolant
Spindle Chiller System
Air Blast System
Adaptive Feedrate Control
Tool Breakage Detection
Tool Life Monitoring
EIA/ISO Input Function
Helical Interpolation
Hand Held Manual Pulse Generator
RS 232 Port Interface
IC Memory Card Interface
3.5″ Floppy Disk Drive Interface
PCMCIA Type II Interface – 2 Slots
Mazak Tapping/Boring Tornado
Tool Path Solid Model
Mazak Tapping/Boring Tornado
Refurbished in 2014 with new Linear Rails & New Ballscrews, and Geometry
This machine is capable of 5 sided machining with it’s nutating head that can be set at vertical, horizontal, or angled location in between separated by .001 degree movement. It has as a full contouring 4th axis rotating table giving it further flexibility. Combine this with both tool length measurement probing and spindle mounted part touch off probing, and you have a machine with alot of capability. This unit also has a chip conveyor, 80 station tool changer and coolant through the spindle.
